Description
It Consists of cross linked polyolefin, Hot fusion tubing and Stainless Reinforcing Steel Rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice before shrinkage process. Sealing structure make the splice free from influence of temperature and humidity in any environment. The Shrinkable sleeve is applied to the optical fiber closure to fix and protect the fiber optic when splicing. This sleeve is the single type for the single-fiber. It does the reinforcement by the stainless steel needles inside the tube. The strength member is made from "Full hard" stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks, no cracking dripping or flowing Hot melt adhesive tube made from polyolefin Ethyl Vinyl Acetate copolymer bonds both to the fiber and heat shrinkable outer tube to effectively encapsulate fusion splice Product specifications: Whole length 60mm Outer diameter after recovery: OD 2.4 mm +/- 0.1mm Hole diameter before recovery: OD 1.5 mm Pin material: SS304 (high quality stainless steel) Pin diameter: OD 1.0 mm Minimum installation temperature: 110°C Max installation time: 60 seconds Standard color: Clear / transparent Compliant norms: UL224,MIL-I-23053, GR-1380-CORE, ZN-96 TPSA-006 Packing Contents: 1000 units of Fiber fusion splice protection sleeve
Pier Telecom Fiber Optic Fusion Splice Protection Sleeves 60mm Heat Shrink Transparent Tube - 400 Pack
Price is below average
Current Price
$23.99
Average
$24
Min Price
$23.99
Max Price
$24
Price dynamics
0%
Description
It Consists of cross linked polyolefin, Hot fusion tubing and Stainless Reinforcing Steel Rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice before shrinkage process. Sealing structure make the splice free from influence of temperature and humidity in any environment. The Shrinkable sleeve is applied to the optical fiber closure to fix and protect the fiber optic when splicing. This sleeve is the single type for the single-fiber. It does the reinforcement by the stainless steel needles inside the tube. The strength member is made from "Full hard" stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks, no cracking dripping or flowing Hot melt adhesive tube made from polyolefin Ethyl Vinyl Acetate copolymer bonds both to the fiber and heat shrinkable outer tube to effectively encapsulate fusion splice Product specifications: Whole length 60mm Outer diameter after recovery: OD 2.4 mm +/- 0.1mm Hole diameter before recovery: OD 1.5 mm Pin material: SS304 (high quality stainless steel) Pin diameter: OD 1.0 mm Minimum installation temperature: 110°C Max installation time: 60 seconds Standard color: Clear / transparent Compliant norms: UL224,MIL-I-23053, GR-1380-CORE, ZN-96 TPSA-006 Packing Contents: 1000 units of Fiber fusion splice protection sleeve
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
