Description
Brief Introduction:
Welcome to use this self-made 2*25W audio amplifier board which is a perfect class-D architecture integrated TPA3123 chip to achieve the single-channel 25W power output. With high efficiency, it especially is available for the outdoor venues where power supply is always in consideration.
Features:
●Class-T architecture
●Proprietary Digital Power Processing Technology
●Requires single +24V power source
●20W per channel (4Ω,10%, THD+N)
●10W per channel (4Ω,0.08%, THD+N)
●Easy engineering evaluation platform for Tripath Technology's TPA3123 product
●No heat sink required up to 25W per channel
●MUTE and SLEEP inputs
●Turn-on & turn-off pop suppression
●Intelligent short-circuit protection
●Intelligent over-temperature protection
●Connects to any passive 4/8Ω speakers
Applications:
●Vending Machines
●Lifts
●Interactive Kiosks
●Home DIY
●Car audio
Benefits:
Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection:RCA Socket (Default),Terminal Block(Optional)
Excellent design of the power ports which allows you to connect multiple amplifier boards in series (Terminal Block Optional)
Excellent heat dissipation eliminates the requirement of an extra heat sink
Specification:
Following table lists all typical data of the Amp board. For full specification, please refer to the data sheet of TPA3123 chip.See Test/Application Circuit. Unless otherwise specified, VDD = 24V, f = 1kHz, Measurement Bandwidth = 22kHz, RL = 4Ω,TA = 25 °C, Package heat slug soldered to 2.8 square-inch PC pad.
Supply Voltage:Min. 10V,Typ. 24V,Max. 30V
Output Power:25W
Total Harmonic Distortion Plus Noise:0.08%
Signal-to-Noise Ratio:99dB
Welcome to use this self-made 2*25W audio amplifier board which is a perfect class-D architecture integrated TPA3123 chip to achieve the single-channel 25W power output. With high efficiency, it especially is available for the outdoor venues where power supply is always in consideration.
Features:
●Class-T architecture
●Proprietary Digital Power Processing Technology
●Requires single +24V power source
●20W per channel (4Ω,10%, THD+N)
●10W per channel (4Ω,0.08%, THD+N)
●Easy engineering evaluation platform for Tripath Technology's TPA3123 product
●No heat sink required up to 25W per channel
●MUTE and SLEEP inputs
●Turn-on & turn-off pop suppression
●Intelligent short-circuit protection
●Intelligent over-temperature protection
●Connects to any passive 4/8Ω speakers
Applications:
●Vending Machines
●Lifts
●Interactive Kiosks
●Home DIY
●Car audio
Benefits:
Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection:RCA Socket (Default),Terminal Block(Optional)
Excellent design of the power ports which allows you to connect multiple amplifier boards in series (Terminal Block Optional)
Excellent heat dissipation eliminates the requirement of an extra heat sink
Specification:
Following table lists all typical data of the Amp board. For full specification, please refer to the data sheet of TPA3123 chip.See Test/Application Circuit. Unless otherwise specified, VDD = 24V, f = 1kHz, Measurement Bandwidth = 22kHz, RL = 4Ω,TA = 25 °C, Package heat slug soldered to 2.8 square-inch PC pad.
Supply Voltage:Min. 10V,Typ. 24V,Max. 30V
Output Power:25W
Total Harmonic Distortion Plus Noise:0.08%
Signal-to-Noise Ratio:99dB
WONDOM 2 X 25Watt Class D Audio Amplifier Board - TPA3123 Stereo For Ticket Checking Machine
Current Price
$19.9
Average
$19.9
Min Price
$19.9
Max Price
$19.9
Price dynamics
0%
Description
Brief Introduction:
Welcome to use this self-made 2*25W audio amplifier board which is a perfect class-D architecture integrated TPA3123 chip to achieve the single-channel 25W power output. With high efficiency, it especially is available for the outdoor venues where power supply is always in consideration.
Features:
●Class-T architecture
●Proprietary Digital Power Processing Technology
●Requires single +24V power source
●20W per channel (4Ω,10%, THD+N)
●10W per channel (4Ω,0.08%, THD+N)
●Easy engineering evaluation platform for Tripath Technology's TPA3123 product
●No heat sink required up to 25W per channel
●MUTE and SLEEP inputs
●Turn-on & turn-off pop suppression
●Intelligent short-circuit protection
●Intelligent over-temperature protection
●Connects to any passive 4/8Ω speakers
Applications:
●Vending Machines
●Lifts
●Interactive Kiosks
●Home DIY
●Car audio
Benefits:
Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection:RCA Socket (Default),Terminal Block(Optional)
Excellent design of the power ports which allows you to connect multiple amplifier boards in series (Terminal Block Optional)
Excellent heat dissipation eliminates the requirement of an extra heat sink
Specification:
Following table lists all typical data of the Amp board. For full specification, please refer to the data sheet of TPA3123 chip.See Test/Application Circuit. Unless otherwise specified, VDD = 24V, f = 1kHz, Measurement Bandwidth = 22kHz, RL = 4Ω,TA = 25 °C, Package heat slug soldered to 2.8 square-inch PC pad.
Supply Voltage:Min. 10V,Typ. 24V,Max. 30V
Output Power:25W
Total Harmonic Distortion Plus Noise:0.08%
Signal-to-Noise Ratio:99dB
Welcome to use this self-made 2*25W audio amplifier board which is a perfect class-D architecture integrated TPA3123 chip to achieve the single-channel 25W power output. With high efficiency, it especially is available for the outdoor venues where power supply is always in consideration.
Features:
●Class-T architecture
●Proprietary Digital Power Processing Technology
●Requires single +24V power source
●20W per channel (4Ω,10%, THD+N)
●10W per channel (4Ω,0.08%, THD+N)
●Easy engineering evaluation platform for Tripath Technology's TPA3123 product
●No heat sink required up to 25W per channel
●MUTE and SLEEP inputs
●Turn-on & turn-off pop suppression
●Intelligent short-circuit protection
●Intelligent over-temperature protection
●Connects to any passive 4/8Ω speakers
Applications:
●Vending Machines
●Lifts
●Interactive Kiosks
●Home DIY
●Car audio
Benefits:
Mounting holes facilitate installation and fixing
Several wiring methods facilitate connection:RCA Socket (Default),Terminal Block(Optional)
Excellent design of the power ports which allows you to connect multiple amplifier boards in series (Terminal Block Optional)
Excellent heat dissipation eliminates the requirement of an extra heat sink
Specification:
Following table lists all typical data of the Amp board. For full specification, please refer to the data sheet of TPA3123 chip.See Test/Application Circuit. Unless otherwise specified, VDD = 24V, f = 1kHz, Measurement Bandwidth = 22kHz, RL = 4Ω,TA = 25 °C, Package heat slug soldered to 2.8 square-inch PC pad.
Supply Voltage:Min. 10V,Typ. 24V,Max. 30V
Output Power:25W
Total Harmonic Distortion Plus Noise:0.08%
Signal-to-Noise Ratio:99dB
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
