Description
YHAAVALE 940 is a 400W multi-function alarm system integration. It matches with two 200W metal ultra slim speaker. The siren is equipped with a wireless remote control, the sound is loud and clear; handle firmware built-in more than 20 kinds of alarm (treble siren, bass whistle, 6 seconds Ambassador, fire, jogging air defense, Ambulance, machine gun), etc., these key alarm can be "DIS" key to switch. The alarm can control the two lights on and off, with short circuit and polarity reverse. It's with simple one button light control on the remote, You can use the PA system by pressing and holding the button on the side of the remote and speaking towards the microphone sound pickup hole. Alarm installation is simple, easy to operate, stable performance, strong power.
SPECIFICATIONS:
Input Voltage:10-16VDC
Input Current: ≤15A
Output Power:400W
Operating Temp:Erature 0℃~+55℃
Impedance:8Ω
Light line Current:≤15A
Frequency Range:300~5000HZ
Sound Pressure:115-122dB
"CODE" code setting (factory has been set up)
1, clear all the handle code: open the host, the host into the standby state, press the button for 5 seconds, set the indicator light flashes 4 times, the host to clear all the handle key code.
2, coding: open the host, the host into the standby state, click the host set button, the indicator light goes off, press the remote control on any key, the indicator light flash twice, the host issued a drop of thought, Success, and boot.
Product Content:
1x400W Siren Amplifier
2x200W ultra slim metal Speaker
1×Wireless remote Controller
1xUsing Manual
Wiring harness and mounting accessories
SPECIFICATIONS:
Input Voltage:10-16VDC
Input Current: ≤15A
Output Power:400W
Operating Temp:Erature 0℃~+55℃
Impedance:8Ω
Light line Current:≤15A
Frequency Range:300~5000HZ
Sound Pressure:115-122dB
"CODE" code setting (factory has been set up)
1, clear all the handle code: open the host, the host into the standby state, press the button for 5 seconds, set the indicator light flashes 4 times, the host to clear all the handle key code.
2, coding: open the host, the host into the standby state, click the host set button, the indicator light goes off, press the remote control on any key, the indicator light flash twice, the host issued a drop of thought, Success, and boot.
Product Content:
1x400W Siren Amplifier
2x200W ultra slim metal Speaker
1×Wireless remote Controller
1xUsing Manual
Wiring harness and mounting accessories
YHAAVALE Car Police Siren 400W Signal Division PA System 940 Wireless Amplifier+2pcs Ultra Slim Metal Speaker Electronic Emergency Horn Sound System for Police Cars Fire Trucks
Current Price
$199.99
Average
$199.99
Min Price
$199.99
Max Price
$199.99
Description
YHAAVALE 940 is a 400W multi-function alarm system integration. It matches with two 200W metal ultra slim speaker. The siren is equipped with a wireless remote control, the sound is loud and clear; handle firmware built-in more than 20 kinds of alarm (treble siren, bass whistle, 6 seconds Ambassador, fire, jogging air defense, Ambulance, machine gun), etc., these key alarm can be "DIS" key to switch. The alarm can control the two lights on and off, with short circuit and polarity reverse. It's with simple one button light control on the remote, You can use the PA system by pressing and holding the button on the side of the remote and speaking towards the microphone sound pickup hole. Alarm installation is simple, easy to operate, stable performance, strong power.
SPECIFICATIONS:
Input Voltage:10-16VDC
Input Current: ≤15A
Output Power:400W
Operating Temp:Erature 0℃~+55℃
Impedance:8Ω
Light line Current:≤15A
Frequency Range:300~5000HZ
Sound Pressure:115-122dB
"CODE" code setting (factory has been set up)
1, clear all the handle code: open the host, the host into the standby state, press the button for 5 seconds, set the indicator light flashes 4 times, the host to clear all the handle key code.
2, coding: open the host, the host into the standby state, click the host set button, the indicator light goes off, press the remote control on any key, the indicator light flash twice, the host issued a drop of thought, Success, and boot.
Product Content:
1x400W Siren Amplifier
2x200W ultra slim metal Speaker
1×Wireless remote Controller
1xUsing Manual
Wiring harness and mounting accessories
SPECIFICATIONS:
Input Voltage:10-16VDC
Input Current: ≤15A
Output Power:400W
Operating Temp:Erature 0℃~+55℃
Impedance:8Ω
Light line Current:≤15A
Frequency Range:300~5000HZ
Sound Pressure:115-122dB
"CODE" code setting (factory has been set up)
1, clear all the handle code: open the host, the host into the standby state, press the button for 5 seconds, set the indicator light flashes 4 times, the host to clear all the handle key code.
2, coding: open the host, the host into the standby state, click the host set button, the indicator light goes off, press the remote control on any key, the indicator light flash twice, the host issued a drop of thought, Success, and boot.
Product Content:
1x400W Siren Amplifier
2x200W ultra slim metal Speaker
1×Wireless remote Controller
1xUsing Manual
Wiring harness and mounting accessories
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
[Music] [Applause] so [Music] [Applause] [Music] [Applause] [Music] so oh ah [Laughter] oh um


Similar products
