Using method of cuff

• Wind the cuff around the upper arm.Keep the lower edge of the cuff at the position above 2-3cm to the elbow joint and keep the air inlet which insert to the cuff at the inner side of arm.
• Stick the cuff tightly.
  Note: The cuff should be wearing comfortably, avoiding too tight or loose.
• Sit straight and flat the arm on table with palm up, also keep the center of cuff and heart at the same level. Also please ensure the air tube not twisted.

Wrong measurement postures

• Do not bend down or body bend forward.
• Do not sit with legs crossed.
• Do not sit on a sofa.(Belly pressure may increase the blood pressure)
• Do not put the arm on the low table.(May increase the blood pressure)

Start measuring
Don't eat, smoke, drink, take bath or do any high impact sport within half an hour before measuring. Measurements shall be taken at the same time every day.
Sit still for 5 minutes before the measurement

• Measurement
  All icons on screen appear for 1 sec after pressing power button, then disappear. After that the deflation icon flickers which means the system is in zero testing. Several seconds later the inflation icon flashes which means the zero testing is finished. Then inflation starts.
• Measurement finished
  After measurement, the monitor will show the SYS, DIA and pulse rate, then inflate the air automatically.
• Take off the cuff
• Shut down
  Press the power button to shut down. Also it will power off automatically in 30 seconds without any operation.