RECEIVER
Built-in Bluetooth for music streaming
Built-in amp (20 watts x 4 RMS/45 peak x 4 channels)
Marine-rated watertight face
Fits into a standard tachometer opening
Inputs: rear USB input, rear aux input
Outputs: 2-channel preamp outputs
Required cutout: 3-3/8" (diameter) x 3-5/16" (depth)
6.5" SPEAKERS
Polypropylene Woofer Cone.
Impact-Resistant Grille Assembly.
Water and UV Resistant Construction
Specification. Power RMS - 50 watts. Power Peak - 150 Watts. Sensitivity 2.83v1m - 90dB. Frequency Response - 50Hz - 18kHz. Impedance - 4 ohms.
Hole Cut-out - 5.06 in..
Dimensions - 7.12 Dia. x 4 Deep in.
6x9" SPEAKERS
Peak Power: 600 watts per pair / 300 watts each.
RMS: 200 watts per pair / 100 watts each.
Recommended power range: 15 - 100 watts RMS per channel.
Frequency Response: 37 - 20,000 Hz.
4 ohms impedance.
Carbon-injected Plus One cone material.
Rubber speaker surround.
Balanced dome tweeters.
Vented magnet assemblies.
AMPLIFIER
45 watts RMS (100 watts peak) x 4 at 4 ohms
Non-bridgeable, 4-ohm stable per channel
MOSFET power supply and Class D amp technology
Conformal-coated circuit board
Preamp and speaker-level inputs
Signal-sensing turn-on on speaker-level inputS
10-gauge power and ground leads recommended
Fuse rating: 15A x 1
Dimensions: 5-1/2"W x 1-5/16"H x 3-9/16"D
SPEAKER WIRE
Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
Marine grade tinned wire
Oxygen Free Copper (OFC)
Length: 50 Feet.
Gauge: 16.
JBL PRV Marine Digital Media Receiver with Built-in Bluetooth, 2X JBL 6.5" 150 Watts Dual Cone Speakers, 2X 6x9 300 Watt Coaxial Speakers - White, Kenwood 4-Channel Amplifier, Speaker Wire
RECEIVER
Built-in Bluetooth for music streaming
Built-in amp (20 watts x 4 RMS/45 peak x 4 channels)
Marine-rated watertight face
Fits into a standard tachometer opening
Inputs: rear USB input, rear aux input
Outputs: 2-channel preamp outputs
Required cutout: 3-3/8" (diameter) x 3-5/16" (depth)
6.5" SPEAKERS
Polypropylene Woofer Cone.
Impact-Resistant Grille Assembly.
Water and UV Resistant Construction
Specification. Power RMS - 50 watts. Power Peak - 150 Watts. Sensitivity 2.83v1m - 90dB. Frequency Response - 50Hz - 18kHz. Impedance - 4 ohms.
Hole Cut-out - 5.06 in..
Dimensions - 7.12 Dia. x 4 Deep in.
6x9" SPEAKERS
Peak Power: 600 watts per pair / 300 watts each.
RMS: 200 watts per pair / 100 watts each.
Recommended power range: 15 - 100 watts RMS per channel.
Frequency Response: 37 - 20,000 Hz.
4 ohms impedance.
Carbon-injected Plus One cone material.
Rubber speaker surround.
Balanced dome tweeters.
Vented magnet assemblies.
AMPLIFIER
45 watts RMS (100 watts peak) x 4 at 4 ohms
Non-bridgeable, 4-ohm stable per channel
MOSFET power supply and Class D amp technology
Conformal-coated circuit board
Preamp and speaker-level inputs
Signal-sensing turn-on on speaker-level inputS
10-gauge power and ground leads recommended
Fuse rating: 15A x 1
Dimensions: 5-1/2"W x 1-5/16"H x 3-9/16"D
SPEAKER WIRE
Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
Marine grade tinned wire
Oxygen Free Copper (OFC)
Length: 50 Feet.
Gauge: 16.
in next 2 weeks

