Description
Parameters:
Module Properties: non-isolated 100W boost module
Input Voltage: 3-35V
Output Voltage: 3-35V(Continuously adjustable)
Input Current: Max 10A(please enhance heat dissipation when input current is over 6A)
Output Current: MAX 6A(please enhance heat dissipation when output current is over 5A)
Constant Current Range: 0.1-10A
Output power = input voltage * 6A
Operating Frequency : 280KHz
Conversion Efficiency : up to 96%
Has over current protection, when input exceeds 12A, automatically reduces the output voltage , have a range of error.
Has Short-circuit protection, input 15A fuse, double circuit protection.
Output anti-anti- irrigation
Identify resistance : Tablet PC , ipad, iphone (some phones identify circuit is different, need to be adjusted)
Resolution : 0.05V/0.05A (10V or less automatically switch the decimal point)
Instructions:
1. Voltmeter power options : the LCD display can be powered by the input terminal or the output terminal. Use the OUT/IN jumper to pick. Remove the jumper to disable the LCD display.
2. USB output port: USB interface is connected to the output directly, with the identify resistor. Please make sure the USB output voltage is consistent with the voltage of your products. Otherwise it will burn your digital products.
3. Switch to display the voltage or current: VI: input voltage; VO: output voltage; IO: output current.
4. The method for adjusting the output current:
Adjust the CV potentiometer, setting the output voltage to your need according to your battery or LED.
Turn the CC potentiometer 30 laps counterclockwise to set a min output current, Then connect the LED. adjusting CC potentiometer to the current you need.
Module Properties: non-isolated 100W boost module
Input Voltage: 3-35V
Output Voltage: 3-35V(Continuously adjustable)
Input Current: Max 10A(please enhance heat dissipation when input current is over 6A)
Output Current: MAX 6A(please enhance heat dissipation when output current is over 5A)
Constant Current Range: 0.1-10A
Output power = input voltage * 6A
Operating Frequency : 280KHz
Conversion Efficiency : up to 96%
Has over current protection, when input exceeds 12A, automatically reduces the output voltage , have a range of error.
Has Short-circuit protection, input 15A fuse, double circuit protection.
Output anti-anti- irrigation
Identify resistance : Tablet PC , ipad, iphone (some phones identify circuit is different, need to be adjusted)
Resolution : 0.05V/0.05A (10V or less automatically switch the decimal point)
Instructions:
1. Voltmeter power options : the LCD display can be powered by the input terminal or the output terminal. Use the OUT/IN jumper to pick. Remove the jumper to disable the LCD display.
2. USB output port: USB interface is connected to the output directly, with the identify resistor. Please make sure the USB output voltage is consistent with the voltage of your products. Otherwise it will burn your digital products.
3. Switch to display the voltage or current: VI: input voltage; VO: output voltage; IO: output current.
4. The method for adjusting the output current:
Adjust the CV potentiometer, setting the output voltage to your need according to your battery or LED.
Turn the CC potentiometer 30 laps counterclockwise to set a min output current, Then connect the LED. adjusting CC potentiometer to the current you need.
DROK LTC1781 100W DC/DC Step Up Converter 3-35V to 3-35V Switching Regulator Constant Current with Volt Ampere Meter USB Interface for DIY Mobile Power Supply
Current Price
$15.67
Average
$14.64
Min Price
$12.5
Max Price
$15.67
Price dynamics
7%
Description
Parameters:
Module Properties: non-isolated 100W boost module
Input Voltage: 3-35V
Output Voltage: 3-35V(Continuously adjustable)
Input Current: Max 10A(please enhance heat dissipation when input current is over 6A)
Output Current: MAX 6A(please enhance heat dissipation when output current is over 5A)
Constant Current Range: 0.1-10A
Output power = input voltage * 6A
Operating Frequency : 280KHz
Conversion Efficiency : up to 96%
Has over current protection, when input exceeds 12A, automatically reduces the output voltage , have a range of error.
Has Short-circuit protection, input 15A fuse, double circuit protection.
Output anti-anti- irrigation
Identify resistance : Tablet PC , ipad, iphone (some phones identify circuit is different, need to be adjusted)
Resolution : 0.05V/0.05A (10V or less automatically switch the decimal point)
Instructions:
1. Voltmeter power options : the LCD display can be powered by the input terminal or the output terminal. Use the OUT/IN jumper to pick. Remove the jumper to disable the LCD display.
2. USB output port: USB interface is connected to the output directly, with the identify resistor. Please make sure the USB output voltage is consistent with the voltage of your products. Otherwise it will burn your digital products.
3. Switch to display the voltage or current: VI: input voltage; VO: output voltage; IO: output current.
4. The method for adjusting the output current:
Adjust the CV potentiometer, setting the output voltage to your need according to your battery or LED.
Turn the CC potentiometer 30 laps counterclockwise to set a min output current, Then connect the LED. adjusting CC potentiometer to the current you need.
Module Properties: non-isolated 100W boost module
Input Voltage: 3-35V
Output Voltage: 3-35V(Continuously adjustable)
Input Current: Max 10A(please enhance heat dissipation when input current is over 6A)
Output Current: MAX 6A(please enhance heat dissipation when output current is over 5A)
Constant Current Range: 0.1-10A
Output power = input voltage * 6A
Operating Frequency : 280KHz
Conversion Efficiency : up to 96%
Has over current protection, when input exceeds 12A, automatically reduces the output voltage , have a range of error.
Has Short-circuit protection, input 15A fuse, double circuit protection.
Output anti-anti- irrigation
Identify resistance : Tablet PC , ipad, iphone (some phones identify circuit is different, need to be adjusted)
Resolution : 0.05V/0.05A (10V or less automatically switch the decimal point)
Instructions:
1. Voltmeter power options : the LCD display can be powered by the input terminal or the output terminal. Use the OUT/IN jumper to pick. Remove the jumper to disable the LCD display.
2. USB output port: USB interface is connected to the output directly, with the identify resistor. Please make sure the USB output voltage is consistent with the voltage of your products. Otherwise it will burn your digital products.
3. Switch to display the voltage or current: VI: input voltage; VO: output voltage; IO: output current.
4. The method for adjusting the output current:
Adjust the CV potentiometer, setting the output voltage to your need according to your battery or LED.
Turn the CC potentiometer 30 laps counterclockwise to set a min output current, Then connect the LED. adjusting CC potentiometer to the current you need.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
in this video we're going to go over some of the basics and also what to look for when purchasing a boost or a buck converter so let's start off with the basics what is a boost or buck converter or as they're sometimes referred to as a step up or step down converter well essentially what a boost or buck converter does is depending on the type of unit you buy it'll either increase or decrease voltage that is fed into the unit some of the boost or buck converters you'll find on the Internet will also have extra features such as current control now this can be useful when driving LEDs per se because we not only want to control the voltage but sometimes we want to control how much current is fed to the LED so it's important to figure out what application your boost or buck converter will be used for to buy the appropriate unit so here's a small sample of some of the boost and buck converter


