Important tips before configuration:
1. Keep your camera and phone nearby the router while setting.
2. The camera only supports 2.4GHz band not 5GHz. Please close the 5GHz before connecting, if your router supports both bands.
3. The name and password of your Wi-Fi should not contain special characters such as 'and &
4. Make sure that your Wi-Fi encryption is WPA2-PSK(AES).
5. The whole process should be finished within 5 minutes from power on. Otherwise, the camera should be unplugged and powered back.
6. Reset the camera if it is failed after several attempts.(Hold the reset button for about 15 seconds, then release the button, it will reset automatically.)

Detailed Steps:
Step 1: Launch the iSmartViewPro app, Click + to access Add Camera page and select "Add cameras via WiFi mode"
Step 2: Scan the QR code on the bottom of the camera, and name the camera. Then "Next"
Step 3: Input correct WiFi password, then "Confirm", then it will try to connect. It will go back to the camera page and show "online" if adds successfully. Please tap "try again" and repeat the process for 2-4 times, if it fails to connect.
You can also choose the method of "One Key Wi-Fi Configuration"
More details, please kindly refer to our Quick Installation Guide

Packing List:
1 * Camera
1 * Power Adapter
1 * Power Cable
1 * Ethernet Cable
1 * Set of Bracket and Mounting Screws
1 * Quick Installation Guide