Description
A&A Customer Service will assist with any fitment questions.
All A&A Remanufactured engines come with a 1-year warranty, ensuring buyer protection!
A&A's Engines are remanufactured using advanced machinery and a set process.
-Remanufactures every cylinder head with new valve seals, seats and resurfacing.
-Cylinder Heads are Pressure Tested with advanced machinery
-Replacement for every timing chain guide and set the engine to factory timing specifications.
-Reconditions every Crankshaft and Rod.
All Remanufactured Engines come with New Parts including:
✔️New Pistons.
✔️New Piston Rings.
✔️New Oil Pump.
✔️New Timing Chain.
✔️New Main Baring.
✔️New Rod Bearing.
✔️New and Full Head Gasket Set.
Installation Check List: (Failure to complete the following will void Warranty)
-Determine why the original engine failure occurred and make appropriate repairs.
-Insure this engine is the same application as the one being replaced.
-Clear all computer diagnostic codes from the vehicle prior to installing.
-Exchange the oil pan and pick up tube.
-Install new thermostat & gasket.
-Remove all "cap-plugs" orifice covers.
-Replace water pump.
-Install replacement sparkplugs & wires.
-Exchange the flywheel and bolts.
-Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
-Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
-Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
-Drain excess oil and coolant from exhaust system.
-If equipped with an engine oil cooler the radiator or external cooler must be replaced.
-Insure the cooling system is flushed and functioning properly.
-Heat tabs are installed on engine if melted or missing Warrantee will be voided.
All A&A Remanufactured engines come with a 1-year warranty, ensuring buyer protection!
A&A's Engines are remanufactured using advanced machinery and a set process.
-Remanufactures every cylinder head with new valve seals, seats and resurfacing.
-Cylinder Heads are Pressure Tested with advanced machinery
-Replacement for every timing chain guide and set the engine to factory timing specifications.
-Reconditions every Crankshaft and Rod.
All Remanufactured Engines come with New Parts including:
✔️New Pistons.
✔️New Piston Rings.
✔️New Oil Pump.
✔️New Timing Chain.
✔️New Main Baring.
✔️New Rod Bearing.
✔️New and Full Head Gasket Set.
Installation Check List: (Failure to complete the following will void Warranty)
-Determine why the original engine failure occurred and make appropriate repairs.
-Insure this engine is the same application as the one being replaced.
-Clear all computer diagnostic codes from the vehicle prior to installing.
-Exchange the oil pan and pick up tube.
-Install new thermostat & gasket.
-Remove all "cap-plugs" orifice covers.
-Replace water pump.
-Install replacement sparkplugs & wires.
-Exchange the flywheel and bolts.
-Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
-Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
-Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
-Drain excess oil and coolant from exhaust system.
-If equipped with an engine oil cooler the radiator or external cooler must be replaced.
-Insure the cooling system is flushed and functioning properly.
-Heat tabs are installed on engine if melted or missing Warrantee will be voided.
A&A Remanufactured 2.4L Engine for 2004-2005 Toyota Rav 4 Engine. 1 Year Warranty!
Current Price
$1 999
Average
$1 999
Min Price
$1 999
Max Price
$1 999
Description
A&A Customer Service will assist with any fitment questions.
All A&A Remanufactured engines come with a 1-year warranty, ensuring buyer protection!
A&A's Engines are remanufactured using advanced machinery and a set process.
-Remanufactures every cylinder head with new valve seals, seats and resurfacing.
-Cylinder Heads are Pressure Tested with advanced machinery
-Replacement for every timing chain guide and set the engine to factory timing specifications.
-Reconditions every Crankshaft and Rod.
All Remanufactured Engines come with New Parts including:
✔️New Pistons.
✔️New Piston Rings.
✔️New Oil Pump.
✔️New Timing Chain.
✔️New Main Baring.
✔️New Rod Bearing.
✔️New and Full Head Gasket Set.
Installation Check List: (Failure to complete the following will void Warranty)
-Determine why the original engine failure occurred and make appropriate repairs.
-Insure this engine is the same application as the one being replaced.
-Clear all computer diagnostic codes from the vehicle prior to installing.
-Exchange the oil pan and pick up tube.
-Install new thermostat & gasket.
-Remove all "cap-plugs" orifice covers.
-Replace water pump.
-Install replacement sparkplugs & wires.
-Exchange the flywheel and bolts.
-Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
-Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
-Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
-Drain excess oil and coolant from exhaust system.
-If equipped with an engine oil cooler the radiator or external cooler must be replaced.
-Insure the cooling system is flushed and functioning properly.
-Heat tabs are installed on engine if melted or missing Warrantee will be voided.
All A&A Remanufactured engines come with a 1-year warranty, ensuring buyer protection!
A&A's Engines are remanufactured using advanced machinery and a set process.
-Remanufactures every cylinder head with new valve seals, seats and resurfacing.
-Cylinder Heads are Pressure Tested with advanced machinery
-Replacement for every timing chain guide and set the engine to factory timing specifications.
-Reconditions every Crankshaft and Rod.
All Remanufactured Engines come with New Parts including:
✔️New Pistons.
✔️New Piston Rings.
✔️New Oil Pump.
✔️New Timing Chain.
✔️New Main Baring.
✔️New Rod Bearing.
✔️New and Full Head Gasket Set.
Installation Check List: (Failure to complete the following will void Warranty)
-Determine why the original engine failure occurred and make appropriate repairs.
-Insure this engine is the same application as the one being replaced.
-Clear all computer diagnostic codes from the vehicle prior to installing.
-Exchange the oil pan and pick up tube.
-Install new thermostat & gasket.
-Remove all "cap-plugs" orifice covers.
-Replace water pump.
-Install replacement sparkplugs & wires.
-Exchange the flywheel and bolts.
-Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
-Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
-Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
-Drain excess oil and coolant from exhaust system.
-If equipped with an engine oil cooler the radiator or external cooler must be replaced.
-Insure the cooling system is flushed and functioning properly.
-Heat tabs are installed on engine if melted or missing Warrantee will be voided.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products