Description
Jump Start your Vehicle:
1. Make sure both vehicles are turned off.
2. Connect one end of the red clamps to the postive (+) post of the dead battery.
3. Connect another end of red clamps to the positive (+) post of the good battery.
4. Connect one end of the black clamps to the negative (-) post of the good battery.
5. Connect another end of the black clamps to the frame bumper or engine block of the dead battery. DO NOT CONNECT DIRECTLY TO THE NEGATIVE (-) POST.
6. If the LED light is bright,it means the connect is right. Make sure clamps from one cable do not accidentally touch the clamps of the other cable.
7. Start the working vehicle.
8. Wait for about 1-2 minutes, start the dead vehicle, and then keep the vehicle running for a few minutes for recharging the battery.
9. Disconnect the cable clamps in the reverse order.
Package includes:
Booster cable x 1
1. Make sure both vehicles are turned off.
2. Connect one end of the red clamps to the postive (+) post of the dead battery.
3. Connect another end of red clamps to the positive (+) post of the good battery.
4. Connect one end of the black clamps to the negative (-) post of the good battery.
5. Connect another end of the black clamps to the frame bumper or engine block of the dead battery. DO NOT CONNECT DIRECTLY TO THE NEGATIVE (-) POST.
6. If the LED light is bright,it means the connect is right. Make sure clamps from one cable do not accidentally touch the clamps of the other cable.
7. Start the working vehicle.
8. Wait for about 1-2 minutes, start the dead vehicle, and then keep the vehicle running for a few minutes for recharging the battery.
9. Disconnect the cable clamps in the reverse order.
Package includes:
Booster cable x 1
Booster Cable - YANTU 10 Feet 4 Gauge1200 A Heavy Duty Jumper Cables with Overvoltage Protector and LED Light, Stops Current and the LED Light off if Connected Wrong -Jumper Cables for Your Car
Price is below average
Current Price
$11.99
Average
$18.52
Min Price
$11.99
Max Price
$39.99
Price dynamics
35%
Description
Jump Start your Vehicle:
1. Make sure both vehicles are turned off.
2. Connect one end of the red clamps to the postive (+) post of the dead battery.
3. Connect another end of red clamps to the positive (+) post of the good battery.
4. Connect one end of the black clamps to the negative (-) post of the good battery.
5. Connect another end of the black clamps to the frame bumper or engine block of the dead battery. DO NOT CONNECT DIRECTLY TO THE NEGATIVE (-) POST.
6. If the LED light is bright,it means the connect is right. Make sure clamps from one cable do not accidentally touch the clamps of the other cable.
7. Start the working vehicle.
8. Wait for about 1-2 minutes, start the dead vehicle, and then keep the vehicle running for a few minutes for recharging the battery.
9. Disconnect the cable clamps in the reverse order.
Package includes:
Booster cable x 1
1. Make sure both vehicles are turned off.
2. Connect one end of the red clamps to the postive (+) post of the dead battery.
3. Connect another end of red clamps to the positive (+) post of the good battery.
4. Connect one end of the black clamps to the negative (-) post of the good battery.
5. Connect another end of the black clamps to the frame bumper or engine block of the dead battery. DO NOT CONNECT DIRECTLY TO THE NEGATIVE (-) POST.
6. If the LED light is bright,it means the connect is right. Make sure clamps from one cable do not accidentally touch the clamps of the other cable.
7. Start the working vehicle.
8. Wait for about 1-2 minutes, start the dead vehicle, and then keep the vehicle running for a few minutes for recharging the battery.
9. Disconnect the cable clamps in the reverse order.
Package includes:
Booster cable x 1
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
