C2G/Cables to Go 4611 66 and 110/88 Replacement Blade Punch (Black/Yellow)

hi everyone and welcome back to another an see how to today we will be showing you the non impact punch down tool and cable stripper and how it works the device will allow you to punch down cables into a 1 1 0 or 88 style Ethernet terminal blocks and can also be used as a cable stripper it is low cost compact tool and ideal if you're working on only a few jacks to use the cable stripper section pull back the tab and insert the cable between the required hole size and release rotate clockwise and peel off the insulation to use the punch tool set the cable in the terminal block and push the cable into the slots with the tool the blades inside the terminal block will slice through the insulation making contact with the wiring you'll need wire cutters to cut the excess cable off however if you are using this tool on a regular basis we recommend you use professional tools which are built tou