- HomeAutomotiveLights & Lighting AccessoriesAccent & Off Road LightingLED & Neon LightsNeon Light Tubes
- To obtain optimum adhesion, pick a unified surface and prepare it clean and dry.
- Consider using surface cleaning solvents IPA/ water mixture (rubbing alcohol) or heptane.
3. APPLY PRESSURE AT LEAST 3 SECONDS
- Firm application pressure develops better adhesive contact and helps improve bond strength.
4. WAIT FOR OPTIMUM ADHESION
- The bond strength will increase as the adhesive flows onto the surface.
- Approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours.
DITRIO 12pcs 12V Underglow RGB LED Strip Light Kit with Blinking Turn Signal and Brake Light for Motorcycles ATVs UTVs, M12r-T
- To obtain optimum adhesion, pick a unified surface and prepare it clean and dry.
- Consider using surface cleaning solvents IPA/ water mixture (rubbing alcohol) or heptane.
3. APPLY PRESSURE AT LEAST 3 SECONDS
- Firm application pressure develops better adhesive contact and helps improve bond strength.
4. WAIT FOR OPTIMUM ADHESION
- The bond strength will increase as the adhesive flows onto the surface.
- Approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours.
in next 2 weeks
