Description
Parameters:
Input Voltage Range: 3.2~13VDC
Output Voltage: ±15VDC
Output Voltage Precision: ±1.5%(output positive +Vo, 100% load); ±5%(output negative -Vo, 100% load)
Linear Adjustment Rate: ±0.5%(output positive +Vo, 100% load); ±1.5%(output negative -Vo, 100% load)
Load Adjustment Rate: ±1%(output positive +Vo, 100% load); ±3%(output negative -Vo, 100% load)
Rated Output Current: 100mA
Efficiency: 82%
Ripple Noise: 60~120mV (input voltage 5V, full load 3W output)
Working Temperature: -40~+85℃ (if more than 50 ℃, needs derating 0.05W / ℃)
Terminal Function:
VIN: 3.2V~Vinmax DC voltage input
GND: Input and output common ground
+Vo: Output positive
-Vo: Output negative
NC: Vacant port, no electrical connection
EN: Module Enable (when VEN <0.8V, the module does not work; when 1.4V Note: when VEN <0.8V, the circuit structure is limited, at this time, + Vo still voltage output about VIN; and -Vo no voltage output.
Note:
1. Please note that the module doesn't support short circuit protective function, please pay attention before wiring.
2. It can get better performance if positive and negative output current are greater than 20mA.
3. + Vo is forbidden with no-load; when the -Vo load is too heavy, + Vo load is too light, it is recommended to increase dummy load resistance at the + Vo and ground.
4. C1/C2/C5/C6/C7/C8 adopts ceramic capacitors can get better overall performance; LM78xx/LM79xx three-terminal regulator chip can be replaced with the same function chip.
5. EN is enable pin, for general application, the pin can be vacated, the module default normal output.
Package Including:
1x Mini Boost Voltage Converter
Input Voltage Range: 3.2~13VDC
Output Voltage: ±15VDC
Output Voltage Precision: ±1.5%(output positive +Vo, 100% load); ±5%(output negative -Vo, 100% load)
Linear Adjustment Rate: ±0.5%(output positive +Vo, 100% load); ±1.5%(output negative -Vo, 100% load)
Load Adjustment Rate: ±1%(output positive +Vo, 100% load); ±3%(output negative -Vo, 100% load)
Rated Output Current: 100mA
Efficiency: 82%
Ripple Noise: 60~120mV (input voltage 5V, full load 3W output)
Working Temperature: -40~+85℃ (if more than 50 ℃, needs derating 0.05W / ℃)
Terminal Function:
VIN: 3.2V~Vinmax DC voltage input
GND: Input and output common ground
+Vo: Output positive
-Vo: Output negative
NC: Vacant port, no electrical connection
EN: Module Enable (when VEN <0.8V, the module does not work; when 1.4V
Note:
1. Please note that the module doesn't support short circuit protective function, please pay attention before wiring.
2. It can get better performance if positive and negative output current are greater than 20mA.
3. + Vo is forbidden with no-load; when the -Vo load is too heavy, + Vo load is too light, it is recommended to increase dummy load resistance at the + Vo and ground.
4. C1/C2/C5/C6/C7/C8 adopts ceramic capacitors can get better overall performance; LM78xx/LM79xx three-terminal regulator chip can be replaced with the same function chip.
5. EN is enable pin, for general application, the pin can be vacated, the module default normal output.
Package Including:
1x Mini Boost Voltage Converter
DROK Mini Boost Voltage Converter DC 3.2-13V to DC ±15V Positive Negative Dual Output Power Regulator Module 100mA Step Up Volts Transformer Board
Price is below average
Current Price
$8.99
Average
$9.13
Min Price
$8.99
Max Price
$9.68
Price dynamics
2%
Description
Parameters:
Input Voltage Range: 3.2~13VDC
Output Voltage: ±15VDC
Output Voltage Precision: ±1.5%(output positive +Vo, 100% load); ±5%(output negative -Vo, 100% load)
Linear Adjustment Rate: ±0.5%(output positive +Vo, 100% load); ±1.5%(output negative -Vo, 100% load)
Load Adjustment Rate: ±1%(output positive +Vo, 100% load); ±3%(output negative -Vo, 100% load)
Rated Output Current: 100mA
Efficiency: 82%
Ripple Noise: 60~120mV (input voltage 5V, full load 3W output)
Working Temperature: -40~+85℃ (if more than 50 ℃, needs derating 0.05W / ℃)
Terminal Function:
VIN: 3.2V~Vinmax DC voltage input
GND: Input and output common ground
+Vo: Output positive
-Vo: Output negative
NC: Vacant port, no electrical connection
EN: Module Enable (when VEN <0.8V, the module does not work; when 1.4V Note: when VEN <0.8V, the circuit structure is limited, at this time, + Vo still voltage output about VIN; and -Vo no voltage output.
Note:
1. Please note that the module doesn't support short circuit protective function, please pay attention before wiring.
2. It can get better performance if positive and negative output current are greater than 20mA.
3. + Vo is forbidden with no-load; when the -Vo load is too heavy, + Vo load is too light, it is recommended to increase dummy load resistance at the + Vo and ground.
4. C1/C2/C5/C6/C7/C8 adopts ceramic capacitors can get better overall performance; LM78xx/LM79xx three-terminal regulator chip can be replaced with the same function chip.
5. EN is enable pin, for general application, the pin can be vacated, the module default normal output.
Package Including:
1x Mini Boost Voltage Converter
Input Voltage Range: 3.2~13VDC
Output Voltage: ±15VDC
Output Voltage Precision: ±1.5%(output positive +Vo, 100% load); ±5%(output negative -Vo, 100% load)
Linear Adjustment Rate: ±0.5%(output positive +Vo, 100% load); ±1.5%(output negative -Vo, 100% load)
Load Adjustment Rate: ±1%(output positive +Vo, 100% load); ±3%(output negative -Vo, 100% load)
Rated Output Current: 100mA
Efficiency: 82%
Ripple Noise: 60~120mV (input voltage 5V, full load 3W output)
Working Temperature: -40~+85℃ (if more than 50 ℃, needs derating 0.05W / ℃)
Terminal Function:
VIN: 3.2V~Vinmax DC voltage input
GND: Input and output common ground
+Vo: Output positive
-Vo: Output negative
NC: Vacant port, no electrical connection
EN: Module Enable (when VEN <0.8V, the module does not work; when 1.4V
Note:
1. Please note that the module doesn't support short circuit protective function, please pay attention before wiring.
2. It can get better performance if positive and negative output current are greater than 20mA.
3. + Vo is forbidden with no-load; when the -Vo load is too heavy, + Vo load is too light, it is recommended to increase dummy load resistance at the + Vo and ground.
4. C1/C2/C5/C6/C7/C8 adopts ceramic capacitors can get better overall performance; LM78xx/LM79xx three-terminal regulator chip can be replaced with the same function chip.
5. EN is enable pin, for general application, the pin can be vacated, the module default normal output.
Package Including:
1x Mini Boost Voltage Converter
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
hello youtube today we're going to demonstrate a d-roc DC about adjustable buck it's not a transformer but its circuitry designed to convert 8 to 20 to 8 to 22 volts DC to 1 to 15 volts DC and the schematic here shows that these these are the input leads the red and the black and these are the output leads the black and the yellow and then so the way that you adjust the voltage is there's this little pot on the bottom here and so you can adjust the voltage there now I haven't tried this yet so we're going to hook this up to the regulated DC power supply and check the output voltage and then the specific say it's good up to 3 amps here and I have this DC motor which draws two amps at 15 volts and then we're going to see how this will adjust the speed of the motor which is also the voltage in the amperage so I will get set up and I will be right there so I'll just show you the this is the


