Epson Motor CF Assy.

[Music] turn the printer off then press and hold the feed button as you turn the printer back on a self-test prints save the printout as you will need to include it when you return the old thermal printhead turn the printer off and remove the power cable open the roll paper cover remove the paper roll and remove the cutter cover when you're done close the roll paper cover remove these screws then remove the dip switch cover then remove the lower case remove this screw then remove the metal shield remove the FFC and auto cutter wire from the main board then unthread the wire from the frame remove these screws then remove the auto cutter remove these screws remove the pressure plate if the springs detach from the plate reattach them remove the thermal printhead install the new thermal printhead by aligning the circular guide peg on each side of the frame with the hooks on each side of the