Gecko BDLTSC8GE1 TSC8GE1 Keypad and Overlay

hey hi if you hear I guess you still have tree flashing dust on your keypad and for what I said in my previous video you don't have any red LED showing up on your board so very likely you have a flow condition you have to work towards the pressure switch part of the circuit so first of all if you have a flow condition make sure that the pump that pushes water to the heater is really working that's the basics if the pump is not on well very likely check the diffuse make sure that the pump is well connected and that it's receiving power so you may use a multimeter for that if the pump is actually not working well you may just have a bad pump that would actually solve it pretty easily however if the pump is working normally well these systems are equipped with a pressure switch so the first thing you wanted to is to use a small piece of wire and short the contacts the two leads on top of t