Description
Swimming Pool fit for Thermostat 220V Pool fit for Thermostat Heater 3KW Pool SPA Bath Hot Tub Electric Water Heater fit for Thermostat
Introduction:
Fit for Thermostat is designed specifically for the needs of the Jacuzzi, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation:
The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user.
P.S:Please refer to the instruction manual for specific installation procedures,thank you !!
Note:
Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less.
The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents.
Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install.
Package Content
1 x Water Heating Thermostat
2 x Interface
1 x Manual
Introduction:
Fit for Thermostat is designed specifically for the needs of the Jacuzzi, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation:
The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user.
P.S:Please refer to the instruction manual for specific installation procedures,thank you !!
Note:
Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less.
The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents.
Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install.
Package Content
1 x Water Heating Thermostat
2 x Interface
1 x Manual
Happybuy Electric Water Heater fit for Thermostat 3KW 220V Electric Water Heater fit for Thermostat for Swimming Pool and SPA Swimming Pool fit for Thermostat Automated 50mm Interface
Current Price
$99.98
Average
$99.98
Min Price
$99.98
Max Price
$99.98
Price dynamics
0%
Description
Swimming Pool fit for Thermostat 220V Pool fit for Thermostat Heater 3KW Pool SPA Bath Hot Tub Electric Water Heater fit for Thermostat
Introduction:
Fit for Thermostat is designed specifically for the needs of the Jacuzzi, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation:
The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user.
P.S:Please refer to the instruction manual for specific installation procedures,thank you !!
Note:
Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less.
The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents.
Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install.
Package Content
1 x Water Heating Thermostat
2 x Interface
1 x Manual
Introduction:
Fit for Thermostat is designed specifically for the needs of the Jacuzzi, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation:
The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user.
P.S:Please refer to the instruction manual for specific installation procedures,thank you !!
Note:
Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less.
The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents.
Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install.
Package Content
1 x Water Heating Thermostat
2 x Interface
1 x Manual
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
