Before use :

The hot glue gun suit for Φ 4.25-4.52" ( 10.8-11.5mm）glue sticks

Use voltage: 100-240V

Frequency: 50-60Hz

Item shipping dimension: 11.4*10.23*3.7 In

Glue gun dimension: 8.46 * 7.48*2.6 In

Shipping weight: 1.26lb

Item weight: 0.94 lb

Lenght of charger cable: 55.11 In

How to use:

Insert power cord into wall socket, insert glue stick into gun, switch power on and preheat hot glue gun for 2-5 minutes before use.

Pulling on the hot glue gun trigger before proper pre-heating may cause the glue gun to jam. If this occurs power off the gun immediately , wait for it to cool then replace a new glue stick if neeeded.

The indicator power light will be red if you select 80W and green if you select 120W.

Pull the handle afterheating, then start your work！

The hot glue gun can keep working up to 2 minutes after unplugging, allows you to work anywhere.

Store hot glue gun only after the nozzle cool down otherwise the remaining heat off the nozzle can damage other items.

About dripping:

Melted glue in the nozzle will continue to drip for a while after the glue gun is unplugged and powered off. This is normal, as the heat and pressure take time to dissipate.

Warring：

The nozele and the glue will be heated over 200℃!  Please DO NOT touch the nozzle on the hot melting glue gun while heating. In case of contact with the hot nozzle or glue, immediately wash with cold water, then remove glue from the skin.

Kepp the heavy-duty hot glue gun away from water. Do not use it under humid conditions.

Not intended for children under 12 years old without adult supervision.

Please check the power cord and plug before each us. Please contact us for support if there's damage.