Description
If you've ever towed a car, truck or boat or used a hitch-mounted carrying rack, you're probably familiar with the wobbling, rocking, banging, clanking and jerking that can come from sloppy/ill-fitting receivers and uneven loading (that annoying trailer hitch rattle). Our anti wobble hitch stabilizer / hitch anti-rattle product, which works for Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25-inch or 2-inch, will easily solve your problems. Easy-to-install, our trailer hitch stabilizer works with a wide variety of trailers, racks, carriers, hitches, and ball mounts. Though our hitch tightner anti wobble is not a conversion tool, it can be used to solidify the connection made when using one. If you are worried about bottoming out when pulling into certain areas, you can flip the hitch tightener over. PLEASE NOTE: You will need a 3/4-inch deep socket or adjustable wrench to fully tighten the nuts when using the product. Re-tighten the nuts on your anti rattle hitch bracket after every use to get the strongest hold at all times (a necessary evil to balance the tightest hold with an ability to still remove the hitch tightener / hitch rattle stop). Our anti rattle hitch tightener is proudly made in the USA and packaged by Americans with Disabilities in Pittsburgh, PA.
Mission Automotive Hitch Tightener for 1.25" and 2" Hitches - Heavy-Duty, Easy-Install, No-Rust - Made in The USA
Price is below average
Current Price
$19.99
Average
$20.28
Min Price
$15.99
Max Price
$29.99
Price dynamics
1%
Description
If you've ever towed a car, truck or boat or used a hitch-mounted carrying rack, you're probably familiar with the wobbling, rocking, banging, clanking and jerking that can come from sloppy/ill-fitting receivers and uneven loading (that annoying trailer hitch rattle). Our anti wobble hitch stabilizer / hitch anti-rattle product, which works for Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25-inch or 2-inch, will easily solve your problems. Easy-to-install, our trailer hitch stabilizer works with a wide variety of trailers, racks, carriers, hitches, and ball mounts. Though our hitch tightner anti wobble is not a conversion tool, it can be used to solidify the connection made when using one. If you are worried about bottoming out when pulling into certain areas, you can flip the hitch tightener over. PLEASE NOTE: You will need a 3/4-inch deep socket or adjustable wrench to fully tighten the nuts when using the product. Re-tighten the nuts on your anti rattle hitch bracket after every use to get the strongest hold at all times (a necessary evil to balance the tightest hold with an ability to still remove the hitch tightener / hitch rattle stop). Our anti rattle hitch tightener is proudly made in the USA and packaged by Americans with Disabilities in Pittsburgh, PA.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
