Description
Ultra low loss Cable is designed to transmit the maximum signal to your antennas. 1/4 inch rfi-240 Cable by RF industries USA Meets military specifications with silver foil and silver coated copper conductors for less signal loss in runs up to 75 feet.. In this High quality cable, The dimensions and spacing of the conductors are uniform. Any abrupt change in the spacing of the two conductors along the cable tends to reflect radio frequency power back toward the source, causing a condition called standing waves, reducing the amount and quality of the transmitted power. To hold the shield at a uniform distance from the central Conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between Conductor and shielding to assure maximum signal transmission and lowest loss. You should allow three inches of cable to make a 90 degree turn in your runs without causing signal loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. The transmission of energy in the line occurs totally through the dielectric inside the cable between the conductors. This Shielded Cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference. Polyolefin (PO) is used in blow molded or rotationally molded components such as heat-shrink tubing for the purposes of mechanically and electrically protecting connections in electronics.
MPD Digital Rptnc -Male-N-Male-LMR240 Times Microwave RP-Tnc Plug to N-Male LMR-240 Antenna Cable 10 ft - with Polyolefin Cross-Linked Strain Relief
Current Price
$39.37
Average
$31.4
Min Price
$28.85
Max Price
$39.37
Price dynamics
20%
Description
Ultra low loss Cable is designed to transmit the maximum signal to your antennas. 1/4 inch rfi-240 Cable by RF industries USA Meets military specifications with silver foil and silver coated copper conductors for less signal loss in runs up to 75 feet.. In this High quality cable, The dimensions and spacing of the conductors are uniform. Any abrupt change in the spacing of the two conductors along the cable tends to reflect radio frequency power back toward the source, causing a condition called standing waves, reducing the amount and quality of the transmitted power. To hold the shield at a uniform distance from the central Conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between Conductor and shielding to assure maximum signal transmission and lowest loss. You should allow three inches of cable to make a 90 degree turn in your runs without causing signal loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. The transmission of energy in the line occurs totally through the dielectric inside the cable between the conductors. This Shielded Cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference. Polyolefin (PO) is used in blow molded or rotationally molded components such as heat-shrink tubing for the purposes of mechanically and electrically protecting connections in electronics.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products