Standard Full Height Bracket for Low Profile Card Adaptec 5805 3805 6805

Adaptec by PMC Adaptec by PMC Presents: How to Properly Install a Bracket on Your Adaptec RAID Controller To install a bracket on an Adaptec controller, whether you're going from a full height to a low profile or vice versa, you're going to need a screwdriver. We recommend that you also use an antistatic mat with a grounding strap to prevent damage to the electronics on the controller. We want you to know that the brackets themselves have a flat side that must always go against the PCB and a threaded flanged tried that should go away from the PCB. Different brackets have different orientations. In this case. we're going to remove a full height bracket. And, in this example, this full-height bracket is installed on the front of the controller controller with the flat side against the PCB. Please note, again flat side against the front of the card. However, the replacement bracket, the l