GX-1-SSH-2.5k Stainless Steel washdown Shear Beam Load cell 2500 lb, NTEP,Moisture Sealed, NEW

in the event that the ims controller displays a load solo arm the discrepant load cell will need to be replaced additions will be stopped while replacing a load cell power down tampering with load cells will result in alarms that will stop additions load cells should only be replaced by trained riggers have blocking on hand to support the loader after it has been jacked up remove the two cotter pins loosen the bolts securing the bad lo cell to the load cell mount use the jacking point on the addition system leg and a hydraulic jack to raise the leg high enough to remove the bad low so once the leg is lifted use a block to secure the leg in the event of jack failure remove the top and bottom pins above and below the load cell remove old load cell and install the new load cell and bolt in place verify that the load cell is not binding in the mount the load cell should be centralized in th