Description
USB-AFC8513 + is available through the USB interface to serial connection and RS232 signal conversion optocoupler programming cable, under the control of the driver running on the computer, will simulate the traditional serial computer's USB port, thus various existing programming software, communications software and monitoring software and other applications. Working power cable from the USB port and by the DC / DC isolated power supply, no longer on the converter box (TX- sent; PWR- power; RX- accepted) PLC port powered by the transceiver status LED indicates data.
Isolated USB-AFC8513 + programming cable is suitable for Matsushita Electric FP0, FP2, FPe, FP-X and FP-M series PLC and GT01, GT30, GT11 series touch screen.
Connector: USB + round 5-pin
Features and Specifications:
•Support USB-AFC8513 + isolated operating system: WIN2000 / WINXP / WIN7 / WIN8.
•Support USB-AFC8513 + Isolated programming software version: FPSOFT V2.0 and above.
•Complete speed USB V1.1 or 2.0.
•USB bus-powered, the current consumption of about 70mA.
•Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation.
•Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity.
•Cable length: 3 m.
Instructions:
After the driver installation is complete, USB-AFC8513 + isolated programming cable corresponding COM port in the Windows Device Manager, simply select the COM port in the programming software or other application software and keep other communication parameters using the default settings next use the same programming cable with the traditional RS232 interface.
Isolated USB-AFC8513 + programming cable is suitable for Matsushita Electric FP0, FP2, FPe, FP-X and FP-M series PLC and GT01, GT30, GT11 series touch screen.
Connector: USB + round 5-pin
Features and Specifications:
•Support USB-AFC8513 + isolated operating system: WIN2000 / WINXP / WIN7 / WIN8.
•Support USB-AFC8513 + Isolated programming software version: FPSOFT V2.0 and above.
•Complete speed USB V1.1 or 2.0.
•USB bus-powered, the current consumption of about 70mA.
•Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation.
•Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity.
•Cable length: 3 m.
Instructions:
After the driver installation is complete, USB-AFC8513 + isolated programming cable corresponding COM port in the Windows Device Manager, simply select the COM port in the programming software or other application software and keep other communication parameters using the default settings next use the same programming cable with the traditional RS232 interface.
1pack USB-AFC8513+ USB-AFC8503 PLC for Panasonic opto-Isolated USB to RS232 Adapter for Nais FP0 / FP2 / FP-X/FPG Electronic Data Systems
Current Price
$27.98
Average
$27.98
Min Price
$27.98
Max Price
$27.98
Price dynamics
0%
Description
USB-AFC8513 + is available through the USB interface to serial connection and RS232 signal conversion optocoupler programming cable, under the control of the driver running on the computer, will simulate the traditional serial computer's USB port, thus various existing programming software, communications software and monitoring software and other applications. Working power cable from the USB port and by the DC / DC isolated power supply, no longer on the converter box (TX- sent; PWR- power; RX- accepted) PLC port powered by the transceiver status LED indicates data.
Isolated USB-AFC8513 + programming cable is suitable for Matsushita Electric FP0, FP2, FPe, FP-X and FP-M series PLC and GT01, GT30, GT11 series touch screen.
Connector: USB + round 5-pin
Features and Specifications:
•Support USB-AFC8513 + isolated operating system: WIN2000 / WINXP / WIN7 / WIN8.
•Support USB-AFC8513 + Isolated programming software version: FPSOFT V2.0 and above.
•Complete speed USB V1.1 or 2.0.
•USB bus-powered, the current consumption of about 70mA.
•Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation.
•Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity.
•Cable length: 3 m.
Instructions:
After the driver installation is complete, USB-AFC8513 + isolated programming cable corresponding COM port in the Windows Device Manager, simply select the COM port in the programming software or other application software and keep other communication parameters using the default settings next use the same programming cable with the traditional RS232 interface.
Isolated USB-AFC8513 + programming cable is suitable for Matsushita Electric FP0, FP2, FPe, FP-X and FP-M series PLC and GT01, GT30, GT11 series touch screen.
Connector: USB + round 5-pin
Features and Specifications:
•Support USB-AFC8513 + isolated operating system: WIN2000 / WINXP / WIN7 / WIN8.
•Support USB-AFC8513 + Isolated programming software version: FPSOFT V2.0 and above.
•Complete speed USB V1.1 or 2.0.
•USB bus-powered, the current consumption of about 70mA.
•Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation.
•Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity.
•Cable length: 3 m.
Instructions:
After the driver installation is complete, USB-AFC8513 + isolated programming cable corresponding COM port in the Windows Device Manager, simply select the COM port in the programming software or other application software and keep other communication parameters using the default settings next use the same programming cable with the traditional RS232 interface.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
[Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music] [Music]


Similar products