Description
Features:QEBIDUL Buck Converter Step Down Module LED digital voltmeter tube, the accuracy is adjustable function, can be aimed at your multimeter adjustable accurate.Press the right key to let the display show the input or output voltage. when the right "OUT" led light, it shows output, the left "IN" led show input.How to adjust the accuracy?Output voltage (Input voltage)calibration stepsStep 1, Adjust the right button so that "OUT" ("IN")LED lighted, the voltmeter shows the value of output voltage; Press the right button for more than 2 seconds, release, voltmeter and "OUT" ( "IN")LED flashes in synchronization so that you enter the output voltage calibration mode. Step 2, Press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press.Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save.Note: Some customers report: "The module can not be adjusted, the output voltage is always equal to the input voltage." When you encounter this problem, please counterclockwise rotation of the potentiometer 10 laps or more, then you can adjust the output voltage. Because the factory default output voltage is 20V.Package Include:DC DC Buck Converter
QEBIDUL LM2596S DC-DC Buck Converter DIY 4-40V to 1.25-37V Step-down Regulator Power Module Volt Stabilizer with LED Voltmeter Display
Price is below average
Current Price
$6.99
Average
$7.3
Min Price
$2.99
Max Price
$19.99
Price dynamics
4%
Description
Features:QEBIDUL Buck Converter Step Down Module LED digital voltmeter tube, the accuracy is adjustable function, can be aimed at your multimeter adjustable accurate.Press the right key to let the display show the input or output voltage. when the right "OUT" led light, it shows output, the left "IN" led show input.How to adjust the accuracy?Output voltage (Input voltage)calibration stepsStep 1, Adjust the right button so that "OUT" ("IN")LED lighted, the voltmeter shows the value of output voltage; Press the right button for more than 2 seconds, release, voltmeter and "OUT" ( "IN")LED flashes in synchronization so that you enter the output voltage calibration mode. Step 2, Press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press.Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save.Note: Some customers report: "The module can not be adjusted, the output voltage is always equal to the input voltage." When you encounter this problem, please counterclockwise rotation of the potentiometer 10 laps or more, then you can adjust the output voltage. Because the factory default output voltage is 20V.Package Include:DC DC Buck Converter
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
hi welcome to Robo jack in this video we are going to do a test review of this LM two five nine six regulator with the input of four 240 volts and the output of regulated 1.25 to thirty seven volts with the display we are going to test this this can handle up to 3 ampere we are going to see if it can handle 3 ampere Adam under different voltage conditions so let's get started as a step-down converter using the LM two five nine six regulators so this has an LED display that shows the voltage input and output depending on selecting this switch so now it shows the light is on here it shows that the input voltage is 12 point 5 volts if I want to see the output just press this and the light will be on so this shows that the output is now 3 point 7 volts so the first thing I've connected my power supply has 2.3 volts and as you can see here it shows 12.5 so death 12 point 3 is the same as my


