Description
Heavy duty, with UV protection: These rugged long-lasting sandbags are made for heavy-duty applications & can sit under direct sunlight for up to three years before they began to degrade. Compared to standard sandbags with a 6 month life, these long-lasting sandbags can last 2-3 times as long. These structurally durable sandbags will not rupture if driven over by cars. Manufactured from high-density polyethylene materials, each strand is a single filament. The non-deformable filaments are woven in a specific pattern and fusion welded for extra strength. Excellent for heavy duty applications like sandbagging, landscaping and construction.
Sandbags Filling Tips:
1. Fill sandbags and tie the bag at the top (lay flat when in place). This sandbag should weigh between 35-40 lbs. An overfilled sandbag weighs between 60-75 lbs and will leave gaps which will allow water to seep through.
2. Always wear gloves during filling operation to avoid hand injuries and protect from contaminants in sand and floodwater. Safety goggles should be used on dry and windy days. Filling sandbags is physically demanding work and can easily cause back and other injuries if not careful. Always lift with your legs and not your back. Do not reach out, bend over, or twist when lifting.
3. Do not throw sandbags - it stresses the back and shoulders. Rather use a brigade line to pass bags
4. Use a short handled, #2 rounded point shovel with straight shaft and D grip, bagger scoop or funnel to fill sandbags.
5. Remove any debris from the areas where the sandbags will be placed. After placing the sandbag, walk on sandbags to create a tight seal between each bag.
Sandbaggy - A Mission Driven Company
Started by two brothers in a garage in Southern California in 2011, Sandbaggy has grown into a trusted provider of erosion control products for the public works and fire departments in cities and counties across America.
Sandbags Filling Tips:
1. Fill sandbags and tie the bag at the top (lay flat when in place). This sandbag should weigh between 35-40 lbs. An overfilled sandbag weighs between 60-75 lbs and will leave gaps which will allow water to seep through.
2. Always wear gloves during filling operation to avoid hand injuries and protect from contaminants in sand and floodwater. Safety goggles should be used on dry and windy days. Filling sandbags is physically demanding work and can easily cause back and other injuries if not careful. Always lift with your legs and not your back. Do not reach out, bend over, or twist when lifting.
3. Do not throw sandbags - it stresses the back and shoulders. Rather use a brigade line to pass bags
4. Use a short handled, #2 rounded point shovel with straight shaft and D grip, bagger scoop or funnel to fill sandbags.
5. Remove any debris from the areas where the sandbags will be placed. After placing the sandbag, walk on sandbags to create a tight seal between each bag.
Sandbaggy - A Mission Driven Company
Started by two brothers in a garage in Southern California in 2011, Sandbaggy has grown into a trusted provider of erosion control products for the public works and fire departments in cities and counties across America.
Sandbaggy - 11" x 48" Long-Lasting Sandbags - Lasts 1-2 Yrs - Sandbags for Flooding - Monofilament - Sand Bag - Flood Water Barrier - Water Curb - Tent Sandbags - Store Bags (Pack of 50)
Current Price
$214.99
Average
$214.99
Min Price
$214.99
Max Price
$214.99
Description
Heavy duty, with UV protection: These rugged long-lasting sandbags are made for heavy-duty applications & can sit under direct sunlight for up to three years before they began to degrade. Compared to standard sandbags with a 6 month life, these long-lasting sandbags can last 2-3 times as long. These structurally durable sandbags will not rupture if driven over by cars. Manufactured from high-density polyethylene materials, each strand is a single filament. The non-deformable filaments are woven in a specific pattern and fusion welded for extra strength. Excellent for heavy duty applications like sandbagging, landscaping and construction.
Sandbags Filling Tips:
1. Fill sandbags and tie the bag at the top (lay flat when in place). This sandbag should weigh between 35-40 lbs. An overfilled sandbag weighs between 60-75 lbs and will leave gaps which will allow water to seep through.
2. Always wear gloves during filling operation to avoid hand injuries and protect from contaminants in sand and floodwater. Safety goggles should be used on dry and windy days. Filling sandbags is physically demanding work and can easily cause back and other injuries if not careful. Always lift with your legs and not your back. Do not reach out, bend over, or twist when lifting.
3. Do not throw sandbags - it stresses the back and shoulders. Rather use a brigade line to pass bags
4. Use a short handled, #2 rounded point shovel with straight shaft and D grip, bagger scoop or funnel to fill sandbags.
5. Remove any debris from the areas where the sandbags will be placed. After placing the sandbag, walk on sandbags to create a tight seal between each bag.
Sandbaggy - A Mission Driven Company
Started by two brothers in a garage in Southern California in 2011, Sandbaggy has grown into a trusted provider of erosion control products for the public works and fire departments in cities and counties across America.
Sandbags Filling Tips:
1. Fill sandbags and tie the bag at the top (lay flat when in place). This sandbag should weigh between 35-40 lbs. An overfilled sandbag weighs between 60-75 lbs and will leave gaps which will allow water to seep through.
2. Always wear gloves during filling operation to avoid hand injuries and protect from contaminants in sand and floodwater. Safety goggles should be used on dry and windy days. Filling sandbags is physically demanding work and can easily cause back and other injuries if not careful. Always lift with your legs and not your back. Do not reach out, bend over, or twist when lifting.
3. Do not throw sandbags - it stresses the back and shoulders. Rather use a brigade line to pass bags
4. Use a short handled, #2 rounded point shovel with straight shaft and D grip, bagger scoop or funnel to fill sandbags.
5. Remove any debris from the areas where the sandbags will be placed. After placing the sandbag, walk on sandbags to create a tight seal between each bag.
Sandbaggy - A Mission Driven Company
Started by two brothers in a garage in Southern California in 2011, Sandbaggy has grown into a trusted provider of erosion control products for the public works and fire departments in cities and counties across America.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
this is sandbag e.com or sandbag II sandbags are used for flood control erosion control paintball barriers and other uses our sandbags are made with polypropylene which is a type of plastic that allows our bags to hold 50 pounds our sandbag II sandbags are available in three sizes these are the 14 by 26 18 by 30 and 25 by 40 let's start with our 14 by 26 bags they're available in white orange green and beige all of these have tie strings so it allows you to tie the bag after you fill it up with sand or gravel it has 1,600 hours of UV which means that the bags can stay outdoors under direct sun exposure for about 6 months these bags are always used for erosion control and flood country now on to our 18 by 30 sandbags these come with tie strings and these have 1,600 hours of UV also and these are best used for erosion control flood control and sometimes used for storing materials lastly t


Similar products
