Description

What is Stabilant 22? Stabilant 22 is an electrically active material which stays resident within a contact-pair, there enhancing conductivity without causing electrical leakage between adjacent contacts. Although Stabilant 22 does have a detergent action it is not sold as a cleaner, just as it has a good lubricant action but is not sold as a lubricant. Stabilant 22 is used to increase the reliability of contacts. Tenfold to one hundred-fold increases are not unusual. At the present time it is used in many different types of contacts, including card-edge connectors, D-type connectors, MIL-spec connectors, signal switches, etc.Stabilant 22 is an initially non-conductive amorphous-semiconductive polyoxyethylene-polyoxypropyline block polymer with a molecular weight of about 2800 that, when used in thin films between contacts, acts under the influence of the electrical field and switches to a conductive state. The electric field gradient at which this occurs is established during manufacture so that the material will remain normally non-conductive. Its switching speed is too slow to allow it to be used in the more traditional semiconductor applications; however, this means that signals at frequencies substantially above five cycles per hour will not be modulated by the switching characteristics of Stabilant 22.Thus, when applied to electromechanical contacts, Stabilant 22 provides the wide-bandpass connection reliability of a soldered joint without bonding the contacting surfaces together! In its undiluted form at room temperature, Stabilant 22 has the viscosity of medium-weight motor oil, although it thins out with increasing temperature, starting to decompose into the two polymers it is formed from at about 240° Celsius. It has a very low vapor pressure and therefore there is no appreciable loss of material from evaporation. It has been in some applications for more than fifteen years without renewal, and it is probably safe to say that in the majority of cases, the

Stabilant 22, 5ml Kit Makes 30ml of 22A - 22

Get price

Current Price

$55.81

Average

$53.61

Min Price

$38

Max Price

$63.69

Price dynamics

Description

According to the data, price will be lower in next two weeks, so not waste your money and track better price!

Product review & video

okay it's going to be the disassembly and reassembly of the Smith & Wesson Model 22s 22 is the exact same thing let's do a quick video on a takedown of it guns are even safety check make sure you remove your magazine and we go ahead and lock the slide back after you lock your slide back here's your takedown button right here you're just going to push going to push this all the way in and lift the barrel straight up and then back a little bit and then out and now we're going to we're going to move our slide forward just hold it down because it could pop off so you're just going to hold it down take your slide release all just pull that out and here's your recoil spring and your equal your guide rod this your recoil spacer these they have these on Amazon they're crazy expensive if you call Smith & Wesson up they'll send you like three or four of them for free just give them a call up and