TURNING POINT PROPELLERS 21431530 / Turning Point Hustler Aluminum Right-Hand Propeller 13 x 15 4-Blade

Today we're going to talk about how to install a Turning Point Aluminum Propeller. Remove the old propeller, and make sure the old thrust washer isn't stuck and has been removed before you install the new thrust washer on to the shaft. Grease the splines with spline grease. Then install the plastic hub onto the propeller. Place the propeller onto the shaft and push it into place. Next, we're going to install the castle, followed by the tabbed washer. Install the nut and tighten it down. Make sure the flat edges of the tabbed washer align with the flat edges of the nut. Put a block of wood between the blade and the cavitation plate then push up on the propeller to hold the block in place as you torque it to manufacturer's specifications. Make sure the tabs are lined up flat against the drive adapter. You may need to adjust the nut. Hammer the tabs down so they hold the nut in place. This