Description
Feartures:
All 40 standard channels
5V output for camera
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable VTX with pigtail antenna
Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro)
0.01mW-Power up and test your system during a race with zero interference
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera
0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
LED display for indicating CH/Band/Power
Specifications:
Operating Voltage: 7 - 24V
Power supply: 5V camera@under 0.3A max
Output power:
25mw: 100mA @12v
200mw: 180mA @12v
500mw: 250mA @12v
800mw: 300mA @12v
Range: Up to 4km with omnidirectional RHCP antennas
Antenna type: pigtail antenna Antenna connector: SMA Female
Video Format: NTSC/PAL
Port connector: JST,6pin
Dimensions: 26(H)x19(W)x8(D)mm
Weight:6.7g(with pigtail antenna)
Note :
5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.
37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.
This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.
Wolfwhoop Q1-Pro 0.01/25/200/500/800mW Switchable 5.8GHz 37CH FPV Transmitter with Pigtail Antenna and FC Uart Support OSD Configuring via Betaflight Flight Controller
Price is below average
Current Price
$16.99
Average
$19.99
Min Price
$16.99
Max Price
$21.99
Price dynamics
15%
Description
Feartures:
All 40 standard channels
5V output for camera
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable VTX with pigtail antenna
Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro)
0.01mW-Power up and test your system during a race with zero interference
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera
0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
LED display for indicating CH/Band/Power
Specifications:
Operating Voltage: 7 - 24V
Power supply: 5V camera@under 0.3A max
Output power:
25mw: 100mA @12v
200mw: 180mA @12v
500mw: 250mA @12v
800mw: 300mA @12v
Range: Up to 4km with omnidirectional RHCP antennas
Antenna type: pigtail antenna Antenna connector: SMA Female
Video Format: NTSC/PAL
Port connector: JST,6pin
Dimensions: 26(H)x19(W)x8(D)mm
Weight:6.7g(with pigtail antenna)
Note :
5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.
37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.
This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
