Description
8 Optional Material Type Selection for Different Materials
You choose Type 1 or 2 or 3 or 4 wood groups or other four material depend on the object density to be measured. The object is denser, you should choose the more latter material group.
Type1: Rhodesia teak, Ormosia, Brizil walnut(0 %~80%)
Type2: Walnut, Clones wood, White poplar, Teak( 0%~80%)
Type3: Fir, Douglas fir, Lauan, White ash, White fir, Maple, Ashwood, Cork wood, Sandalwood, Elm, Koombar( 0%~80%)
Type4: Masson pine, Chile pine, Spruce, Larch, Apitong, Birch, Basswood( 0%~80%)
Other four material measurement range
A-perovskite measurement range: 0%~11.0%
B-cement mortar measurement range: 0%~8.6%
C-lime mortar measurement range: 0%~9.9%
D-Brick measurement range: 0%~16.5%
Widely Applications
This moisture detector is a DC resistance wood moisture tester (probe type), which can be widely used in the determination of moisture in wooden bamboo, paper products, and traditional products.
Specification
Range: Wood 0 ~80%
Resolution: 0.1%
Accuracy: ±2%
Operating temperature: 0 ° C -40 ° C
Operating humidity: 20% RH-90% RH
Display: Large LCD Digital display
Power supply: 3 AAA batteries (included))
Probe length: 9.8mm
Automatic power off: about 10 minutes
Meter housing: silicone material
Warm Prompt
1.The unit is automatically calibrated after power-on, and the probe can not touch any object when the power is turned on.
2. The probe is very sharp, don't point it at people or leave it to the child as a toy.
3. Avoid corrosive liquids in contact with the device and the probe may be damaged.
4. Do not let the probe of the wood moisture detector touch the object to avoid damage
5. When the battery is low, it may affect the accuracy of the water moisture tester. Please replace the battery immediately.
