Features:

Replacement 3D analog joystick thumb stick joystick sensor module for Nintendo Switch Joy Con.

Can replace your old, broken, worn-out or damaged analog, fixes common issues with faulty thumbsticks, bring your controller back to life.

Easy to install and detach, comes with screwdriver repair tools.

A great backup for all Nintendo Switch Fans.

Size: "Y" Tri-wing Screwdriver: 0.6 x 20mm

 "+" Cross Screwdriver: 1.5 x 20mm

How to install the Metal Lock Buckles?

1.Use the "Y" screwdriver to open 4 screws on the joy con.

2.Use the "+" screwdriver to open the screw inside the joy con.

3.Take down the small iron with the tweezers.

4.Then take the original lock buckle out carefully.

5.Then put the spring into the metal lock buckle.

6.Put the metal lock buckle into the joy con by tweezers and press the spring into the slot.

7.Finally,put back the small iron and the screw.Close the joy con case back.

Package Includes:

2 x Replacement Joystick for Nintendo Switch Joy-Con (Black)

1 x "Y" Tri-wing Screwdriver

1 x "+" Cross Screwdriver

1 x Tweezer

4 x Joy Con Metal Lock Buckle

8 x Thumbstick Caps

NOTE:

1.Please calibrate the joystick using Nintendo switch setting after installation if it drifts.

2.The left and right lock buckle are different.Be careful not to reverse them.

3.When you remove the original buckle,there is a little iron.You can use the tweezers to pry it.

4.Be careful about the spring when you remove the original buckle.

5.Be careful about the orange flat wire between the top and bottom of Joy Con case.So you need to open the Joy Con case carefully.