Applicable models: PS4, PS4 Slim and PS4 Pro console.

Supply power: USB 5V (Connect the included USB cable with the console)

Current: the max current for individual controller can reach 800mA when the PS4 controller is charging, the average current is 400mA when two controllers are charging (no fan is working)

Max fan speed: 5000±10%PRM ，max air output：12.6 CFM

Charging time: 2.5-3 hours (two controllers charging simultaneously)

Product size: 7.5*6.3*1.95in

Product material: ABS

Accessories: USB Cable(8.7in)

User guides:

1. Put this product on the drafty platform, then put the PS4 console into it vertically. (Notice: put the front of PS4 console with the same side of its Micro-USB port. Please use the included plastic part to assemble the PS4 Slim console, no need for the PS4 and PS4 Pro console.)

2. Use the latching switch to control the fan, close the fan when it is bouncing, open it when it is pressing down.

3. We can charge the PS4 controllers via the PS4 charging docks a. When the PS4 controller is not connected with PS4 console, the indicator for the PS4 controller will be in orange and flashes breathingly, and it will go out when the controller is fully charged. It will flash once when one fully charged controller is put on it. b. When the PS4 controller is connected with PS4 console, the indicator of the PS4 controller will be in blue. Press PS button if you need to check if it is in charging status.

4. PS4 controller supplies power from the charging battery while charging, its indicator may be changed in red and green.

5. If the USB charging cable is disconnected, PS4 controller will not charge when its battery power is over 70%, and the using time will be shorter than the fully charged one.

6. Pease refer to the instruction manual to see the details of product using attention.