Description
Illumination. <0.1
AGC: Auto
Blc: cars
White Balance: Auto
728x512 effective pixels.
Video output: 1.0vp-p, 75
Electronic shutters: 1/60 (NTSC) - 1 / 10.000, 1/50 (PAL) - 1 / 10.000
S / N: better than 48db
From the class: IP 68
Operation temperature: from - 20 ° C + 80 ° C RH95%
Storage temperature: - 30 ° C + 80 ° C
Labor (dcv): 12
For television systems of the machine, a rear view camera.
Usually monitors support NTSC and pal TV systems. so do not importand the car cameras have NTSC or PAL. Please confirm that if the monitors can support NTSC or PAL. If your monitor only can support NTSC, or a friend, please leave us a message which TV you one business day after you make the payment. If not. We will send the car camera with the TV system to our customers at random.
How to install:
Fix the camera to a special design hole in your car.
Connect the built-in license plate light of the camera, where the stock license plate light was connected to get the power
Connect the power to the camera car reverse lights - red wire to positive and negative black wire.
Video cable to connect the camera to the extension cord.
Connect an extension cord to the machine monitor.
You will see the images when your car is on the reverse transition.
=> Your stock license plate light at the car
=> Set the camera where the stock license plate light.
=> You will see the images when your car is on the reverse transition.
Auto Wayfeng® Special Car Rearview Rear View Reverse Backup Camera for Land Rover Discovery 3 Range Rover Sport Freelander Freelander 2
Price is below average
Current Price
$15.98
Average
$16.98
Min Price
$15.98
Max Price
$17.98
Price dynamics
6%
Description
Illumination. <0.1
AGC: Auto
Blc: cars
White Balance: Auto
728x512 effective pixels.
Video output: 1.0vp-p, 75
Electronic shutters: 1/60 (NTSC) - 1 / 10.000, 1/50 (PAL) - 1 / 10.000
S / N: better than 48db
From the class: IP 68
Operation temperature: from - 20 ° C + 80 ° C RH95%
Storage temperature: - 30 ° C + 80 ° C
Labor (dcv): 12
For television systems of the machine, a rear view camera.
Usually monitors support NTSC and pal TV systems. so do not importand the car cameras have NTSC or PAL. Please confirm that if the monitors can support NTSC or PAL. If your monitor only can support NTSC, or a friend, please leave us a message which TV you one business day after you make the payment. If not. We will send the car camera with the TV system to our customers at random.
How to install:
Fix the camera to a special design hole in your car.
Connect the built-in license plate light of the camera, where the stock license plate light was connected to get the power
Connect the power to the camera car reverse lights - red wire to positive and negative black wire.
Video cable to connect the camera to the extension cord.
Connect an extension cord to the machine monitor.
You will see the images when your car is on the reverse transition.
=> Your stock license plate light at the car
=> Set the camera where the stock license plate light.
=> You will see the images when your car is on the reverse transition.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
[Music] [Music] start by removing the top fascia color leaving its out of place with bodø tool to start removing the middle console you will have to put the gearstick into drive simply pull the stick up and prize away the traction control panel disconnecting the wiring in the process [Music] once the traction control panel is out of the way use a boater tool to remove the center console remember to disconnect the cigarette lighter in the process we'll simply put it to one side begin to remove all of the screws that surround the bottom AC panel the main head unit and the top hazard switch panel one of the screws have been removed move both the AC panel and the hazard switch panel aside this will make the removal of the head unit a lot easier when free disconnect all of the wiring now take your CT SLR double-o 9.2 and the patch lead and attach them to your new head unit you will also want


Similar products
