Description
Instruction: 1: Printout the picture according to the photo parameters;the mirror side is the printing surface. 2: Dry the ink by nature or by hair drier. 3: Spray the gloss oil on the pattern surface uniformly (transparent auto spray paint,sold in paint shop). 4: Dry the gloss oil by nature or by hair drier. 5: Cut it along the periphery by 1mm from the pattern. 6: Soak it in water for about 30~60 seconds,then slide the coating and paper adequately by nature. 7: Spread the bass paper slowly to make the transfer printing coating stick to the product surface. 8: Damp and soft the alabaster paper,discharge the bubble and water in the film sufficiently,and then dry the surface by absorbent paper. 9: Bake it in the oven for 10~15 minutes at the temperature of 100~110℃,or dry it by nature for 1~3 days. Please notice:please do the transfer within 10 hours after you print and spray,don't leave it over 12 hours,or it maybe can't release!thanks
20 Sheets DIY A4 Inkjet Water Slide Decal Paper Sheets Transparent Clear for Inkjet Printer Transfer Paper
Price is below average
Current Price
$16.99
Average
$17.72
Min Price
$12.99
Max Price
$19
Price dynamics
4%
Description
Instruction: 1: Printout the picture according to the photo parameters;the mirror side is the printing surface. 2: Dry the ink by nature or by hair drier. 3: Spray the gloss oil on the pattern surface uniformly (transparent auto spray paint,sold in paint shop). 4: Dry the gloss oil by nature or by hair drier. 5: Cut it along the periphery by 1mm from the pattern. 6: Soak it in water for about 30~60 seconds,then slide the coating and paper adequately by nature. 7: Spread the bass paper slowly to make the transfer printing coating stick to the product surface. 8: Damp and soft the alabaster paper,discharge the bubble and water in the film sufficiently,and then dry the surface by absorbent paper. 9: Bake it in the oven for 10~15 minutes at the temperature of 100~110℃,or dry it by nature for 1~3 days. Please notice:please do the transfer within 10 hours after you print and spray,don't leave it over 12 hours,or it maybe can't release!thanks
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
