Description
BerryGPS-IMUv3 has been specifically designed for the Raspberry Pi Zero. It is also compatible with all other versions of Raspberry Pi.
BerryGPS-IMUv3 uses the CAM-M8 from uBlox, which is a high quality GPS module which also supports 3 concurrent GNSS(GPS, Galileo, GLONASS, BeiDou).
This module is also equip with 10DOF. The same sensors that are found on the BerryIMU
All the sensors found on the BerryGPS-IMUv3 are:
Features
Built in antenna: BerryGPS-IMUv3 comes with an inbuilt antenna.
SupCap: The SuperCap keeps the phemeris data stored in the battery backup RAM for 4 hours. This allows for faster acquisitions when the module is power cycled.
Fix and PPS indicator: The on board LED will flash once a second when a fix has been obtained. The PPS signal is also presented on an output pin.
3 concurrent GNSS: Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou).
Protocols: NMEA, UBX binary, RTCM.
GPS Update rate: Single GNSS - up to 18Hz, Dual GNSS up to 10Hz.
Connection for external antenna: BerryGPS-IMUv3 also includes a uFL connector for an external antenna, which can be used when BerryGPS-IMUv3 doesn't have clear access to the sky.
BerryGPS-IMU comes with;
1 x BerryGPS-IMUv3 PCB
1 x Female header
4 x Nylon standoffs, nuts and screws
The IMU components are the same as those found on the BerryIMU https://www.amazon.com/dp/B072MN8ZRC
Raspberry Pi not included
BerryGPS-IMUv3 uses the CAM-M8 from uBlox, which is a high quality GPS module which also supports 3 concurrent GNSS(GPS, Galileo, GLONASS, BeiDou).
This module is also equip with 10DOF. The same sensors that are found on the BerryIMU
All the sensors found on the BerryGPS-IMUv3 are:
- GPS
- Accelerometer
- Gyroscope
- Magnetometer (Compass)
- Barometric/Altitude
- Temperature
Features
Built in antenna: BerryGPS-IMUv3 comes with an inbuilt antenna.
SupCap: The SuperCap keeps the phemeris data stored in the battery backup RAM for 4 hours. This allows for faster acquisitions when the module is power cycled.
Fix and PPS indicator: The on board LED will flash once a second when a fix has been obtained. The PPS signal is also presented on an output pin.
3 concurrent GNSS: Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou).
Protocols: NMEA, UBX binary, RTCM.
GPS Update rate: Single GNSS - up to 18Hz, Dual GNSS up to 10Hz.
Connection for external antenna: BerryGPS-IMUv3 also includes a uFL connector for an external antenna, which can be used when BerryGPS-IMUv3 doesn't have clear access to the sky.
BerryGPS-IMU comes with;
1 x BerryGPS-IMUv3 PCB
1 x Female header
4 x Nylon standoffs, nuts and screws
The IMU components are the same as those found on the BerryIMU https://www.amazon.com/dp/B072MN8ZRC
Raspberry Pi not included
BerryGPS-IMUv3 - GPS and 10DOF for The Raspberry Pi - Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor
Current Price
$53.5
Average
$47.75
Min Price
$24.5
Max Price
$53.5
Price dynamics
11%
Description
BerryGPS-IMUv3 has been specifically designed for the Raspberry Pi Zero. It is also compatible with all other versions of Raspberry Pi.
BerryGPS-IMUv3 uses the CAM-M8 from uBlox, which is a high quality GPS module which also supports 3 concurrent GNSS(GPS, Galileo, GLONASS, BeiDou).
This module is also equip with 10DOF. The same sensors that are found on the BerryIMU
All the sensors found on the BerryGPS-IMUv3 are:
Features
Built in antenna: BerryGPS-IMUv3 comes with an inbuilt antenna.
SupCap: The SuperCap keeps the phemeris data stored in the battery backup RAM for 4 hours. This allows for faster acquisitions when the module is power cycled.
Fix and PPS indicator: The on board LED will flash once a second when a fix has been obtained. The PPS signal is also presented on an output pin.
3 concurrent GNSS: Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou).
Protocols: NMEA, UBX binary, RTCM.
GPS Update rate: Single GNSS - up to 18Hz, Dual GNSS up to 10Hz.
Connection for external antenna: BerryGPS-IMUv3 also includes a uFL connector for an external antenna, which can be used when BerryGPS-IMUv3 doesn't have clear access to the sky.
BerryGPS-IMU comes with;
1 x BerryGPS-IMUv3 PCB
1 x Female header
4 x Nylon standoffs, nuts and screws
The IMU components are the same as those found on the BerryIMU https://www.amazon.com/dp/B072MN8ZRC
Raspberry Pi not included
BerryGPS-IMUv3 uses the CAM-M8 from uBlox, which is a high quality GPS module which also supports 3 concurrent GNSS(GPS, Galileo, GLONASS, BeiDou).
This module is also equip with 10DOF. The same sensors that are found on the BerryIMU
All the sensors found on the BerryGPS-IMUv3 are:
- GPS
- Accelerometer
- Gyroscope
- Magnetometer (Compass)
- Barometric/Altitude
- Temperature
Features
Built in antenna: BerryGPS-IMUv3 comes with an inbuilt antenna.
SupCap: The SuperCap keeps the phemeris data stored in the battery backup RAM for 4 hours. This allows for faster acquisitions when the module is power cycled.
Fix and PPS indicator: The on board LED will flash once a second when a fix has been obtained. The PPS signal is also presented on an output pin.
3 concurrent GNSS: Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou).
Protocols: NMEA, UBX binary, RTCM.
GPS Update rate: Single GNSS - up to 18Hz, Dual GNSS up to 10Hz.
Connection for external antenna: BerryGPS-IMUv3 also includes a uFL connector for an external antenna, which can be used when BerryGPS-IMUv3 doesn't have clear access to the sky.
BerryGPS-IMU comes with;
1 x BerryGPS-IMUv3 PCB
1 x Female header
4 x Nylon standoffs, nuts and screws
The IMU components are the same as those found on the BerryIMU https://www.amazon.com/dp/B072MN8ZRC
Raspberry Pi not included
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
