Electronics-Salon 2PCS Aluminum Heatsink, 1.48" x 1.44" x 0.93", Heat-Sink.

in the previous video where I took a closer look at the TPS 61 0 88 I did some measurements of the output noise but I also ran the module up to the maximum specified output power of 12 volts 2 amps it was to be expected that the losses would turn into heat and just the small size of this board would not be enough to dissipate all the heat safely so the boost chip reached a toasty 150 degrees Celsius and inevitably went into thermal protection there were two questions that people mainly left in the comments first people were curious if this module would behave differently if a heatsink was installed and also some people thought about using this module in a fixed output voltage configuration because if you remember there is a chip on this module that will switch the output voltage based on a quick charge spec and depending what the load is requesting through that protocol but people might