Am-Tech 2 x 14-inch Hasp Lock

to install a master lock hasp pre position the hasp arm and the hasp liking eye on the object you want to secure such as the shed doors in this demonstration to verify fit hasp assembly should fit flat against the closed door with the locking eye centered in the opening of the hasp arm remove the hasp arm away from the locking eye then mark the screw holes in the locking eye base plate on the door using a 1/8 inch drill bit drill pilot holes to ensure that the wood does not split when installing screws use a screw driver to mount the locking eye to the door place the hasp arm on the eye for proper fit then carefully open the arm while holding it in place and marking the screw holes drill pilot holes to ensure that the wood will not split when the screws are installed use a screwdriver to mount the hasp arm to the door close the door or lid to verify that the hasp opens and closes smooth