- HomeElectronicsAccessories & SuppliesAudio & Video AccessoriesRemote Controls & AccessoriesRemote-Control Extenders
Description
IR Infrared Remote Control Receiver Extender Repeater Emitter USB Adapter Cable for IR Receiver Emitter Extender Repeater System
Note:
1.Please allow 1-3mm errors due to manual measurement.
2.Due to the difference between different monitors,there are color differences,pls take the real product as the standard!
Features:
Remote transponder is no power, if the set-top boxes and LCD TVs with USB interface, you can get a USB interface for power supply. If there is no USB interface, the user can use the phone's USB charger to get power.
Specifications:
Receive Cable Length: Approx.1.4M
Transmission Cable Length: Approx.2M
Color:As The Picture Shows
Tips:set-top box or other devices must be placed to the area that your remote control cannot controlled directlly,or the remote control's signal and your adapter's signal will be sent at the same time.Since the two signals are not synchronized, it will not work properly due to interference with each other!
Universal Receiver Operating Instructions:
1.Insert the "USB Plug" into the set-top box,TV,phone charger or other phone charger(this product uses a 5V supply)
2.Please align the receiver window of the devices(some devices will be marked R, IR, IRF)
3.3. The "receiving end" is placed in a suitable position to facilitate the remote control receiver.
Installation Method:
Put the transmit end near the remote control receiver window of the appliance.
You put the receiver attached to easily position the remote control signal is received (the receiver requires a positive direction for the remote control transmitter, too biased direction will affect the reception).
Finally, plug in the power can be used.
Package includes:
1 * IR Receiver Extender Repeater Emitter USB Adapter
Maybe you also like:
About shipping
4. The images shown are not the actual item
Note:
1.Please allow 1-3mm errors due to manual measurement.
2.Due to the difference between different monitors,there are color differences,pls take the real product as the standard!
Features:
Remote transponder is no power, if the set-top boxes and LCD TVs with USB interface, you can get a USB interface for power supply. If there is no USB interface, the user can use the phone's USB charger to get power.
Specifications:
Receive Cable Length: Approx.1.4M
Transmission Cable Length: Approx.2M
Color:As The Picture Shows
Tips:set-top box or other devices must be placed to the area that your remote control cannot controlled directlly,or the remote control's signal and your adapter's signal will be sent at the same time.Since the two signals are not synchronized, it will not work properly due to interference with each other!
Universal Receiver Operating Instructions:
1.Insert the "USB Plug" into the set-top box,TV,phone charger or other phone charger(this product uses a 5V supply)
2.Please align the receiver window of the devices(some devices will be marked R, IR, IRF)
3.3. The "receiving end" is placed in a suitable position to facilitate the remote control receiver.
Installation Method:
Put the transmit end near the remote control receiver window of the appliance.
You put the receiver attached to easily position the remote control signal is received (the receiver requires a positive direction for the remote control transmitter, too biased direction will affect the reception).
Finally, plug in the power can be used.
Package includes:
1 * IR Receiver Extender Repeater Emitter USB Adapter
Maybe you also like:
About shipping
4. The images shown are not the actual item
Calvas USB Adapter Cable IR Infrared Remote Control Receiver Extender Repeater Emitter for IR Receiver Emitter Extender Repeater System
Current Price
$12.59
Average
$12.59
Min Price
$12.59
Max Price
$12.59
Price dynamics
0%
Description
IR Infrared Remote Control Receiver Extender Repeater Emitter USB Adapter Cable for IR Receiver Emitter Extender Repeater System
Note:
1.Please allow 1-3mm errors due to manual measurement.
2.Due to the difference between different monitors,there are color differences,pls take the real product as the standard!
Features:
Remote transponder is no power, if the set-top boxes and LCD TVs with USB interface, you can get a USB interface for power supply. If there is no USB interface, the user can use the phone's USB charger to get power.
Specifications:
Receive Cable Length: Approx.1.4M
Transmission Cable Length: Approx.2M
Color:As The Picture Shows
Tips:set-top box or other devices must be placed to the area that your remote control cannot controlled directlly,or the remote control's signal and your adapter's signal will be sent at the same time.Since the two signals are not synchronized, it will not work properly due to interference with each other!
Universal Receiver Operating Instructions:
1.Insert the "USB Plug" into the set-top box,TV,phone charger or other phone charger(this product uses a 5V supply)
2.Please align the receiver window of the devices(some devices will be marked R, IR, IRF)
3.3. The "receiving end" is placed in a suitable position to facilitate the remote control receiver.
Installation Method:
Put the transmit end near the remote control receiver window of the appliance.
You put the receiver attached to easily position the remote control signal is received (the receiver requires a positive direction for the remote control transmitter, too biased direction will affect the reception).
Finally, plug in the power can be used.
Package includes:
1 * IR Receiver Extender Repeater Emitter USB Adapter
Maybe you also like:
About shipping
4. The images shown are not the actual item
Note:
1.Please allow 1-3mm errors due to manual measurement.
2.Due to the difference between different monitors,there are color differences,pls take the real product as the standard!
Features:
Remote transponder is no power, if the set-top boxes and LCD TVs with USB interface, you can get a USB interface for power supply. If there is no USB interface, the user can use the phone's USB charger to get power.
Specifications:
Receive Cable Length: Approx.1.4M
Transmission Cable Length: Approx.2M
Color:As The Picture Shows
Tips:set-top box or other devices must be placed to the area that your remote control cannot controlled directlly,or the remote control's signal and your adapter's signal will be sent at the same time.Since the two signals are not synchronized, it will not work properly due to interference with each other!
Universal Receiver Operating Instructions:
1.Insert the "USB Plug" into the set-top box,TV,phone charger or other phone charger(this product uses a 5V supply)
2.Please align the receiver window of the devices(some devices will be marked R, IR, IRF)
3.3. The "receiving end" is placed in a suitable position to facilitate the remote control receiver.
Installation Method:
Put the transmit end near the remote control receiver window of the appliance.
You put the receiver attached to easily position the remote control signal is received (the receiver requires a positive direction for the remote control transmitter, too biased direction will affect the reception).
Finally, plug in the power can be used.
Package includes:
1 * IR Receiver Extender Repeater Emitter USB Adapter
Maybe you also like:
About shipping
4. The images shown are not the actual item
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
how's it going guys Phil here and this is a review of Varela's ir range extender you'll get the range extender power adapter and an instruction sheet the unit has one receiver and one emitter the USB cable supplies power to the unit and a six and a half feet long it can be plugged into the included adapter or into your TV's USB port note that some TVs don't supply power to the USB ports if the TV is off so if you do use the TV USB port make sure the TV is on before you point your remote at the receiver you'll want to place the receiver where it can be in the line of sight of the remote control then this other 10 foot long wire is connected to the emitter which will be placed over the devices remote sensor so for example if I want to extend the range of my TV I stick the emitter over the sensor here then I place a receiver where I can point the remote at it and now I can point my remote


Similar products
