Description
Product Details
Preheating Time: 30 seconds
Range: 0 ~ 9999 ppm
Resolution: 1 ppm
Sense Type: Sound and light
Exceed Level: 2000 ppm
Battery Powered: 3 x AAA alkaline batteries
Operation Environment: 32-122℉, 15% ~ 90%
Combustible Gas Like : Natural gas, coal gas, methane and other combustible gas
Package Included: 1 x Gas Leak Monitor + 1 x User Manual
Operation Guide
1)Install Batteries: Install batteries correctly.
2)Power On: Press "Power" button (middle) for 2 seconds until the screen lights up and display "1.0.0" version number.
3)Warming-Up: The screen will count down 30 seconds to preheat. Press "Skip" button (right) can skip this process.
4)Measurement: Start measurement after preheating
5)Reset: Press "Clear" button (left) for 2 seconds
6)Shut Down: Press "Power" button for 2 seconds. This tester is a big consumer of power, please remember to power it off after use.
7)Replace Batteries: When the battery voltage is low, the screen will displays "----" flashing symbols warning. Replace batteries in time.
Widespread Use
You can check gas leak for natural gas tank, stove, fireplace, cooktop, heater, burner, dryer, oven, cooker, propane lantern. Applies to measure and search for flammable gas, mines, construction projects, safety check of gas appliance, oil spill
Notes
1. It is necessary to power the gas leak instrument on for 5-10 minutes before measurement if long time no use.
2. Please power off the monitor before replacing batteries.
3.The measurement process is to convert electrochemical signal to digital signal, the display may delay 1-2 seconds.
4. The screw hole on the back of the monitor is used to install belt clip (not included).
5. The readings show the real-time concentration of combustible gas, it is not fixed but constantly changing.
Preheating Time: 30 seconds
Range: 0 ~ 9999 ppm
Resolution: 1 ppm
Sense Type: Sound and light
Exceed Level: 2000 ppm
Battery Powered: 3 x AAA alkaline batteries
Operation Environment: 32-122℉, 15% ~ 90%
Combustible Gas Like : Natural gas, coal gas, methane and other combustible gas
Package Included: 1 x Gas Leak Monitor + 1 x User Manual
Operation Guide
1)Install Batteries: Install batteries correctly.
2)Power On: Press "Power" button (middle) for 2 seconds until the screen lights up and display "1.0.0" version number.
3)Warming-Up: The screen will count down 30 seconds to preheat. Press "Skip" button (right) can skip this process.
4)Measurement: Start measurement after preheating
5)Reset: Press "Clear" button (left) for 2 seconds
6)Shut Down: Press "Power" button for 2 seconds. This tester is a big consumer of power, please remember to power it off after use.
7)Replace Batteries: When the battery voltage is low, the screen will displays "----" flashing symbols warning. Replace batteries in time.
Widespread Use
You can check gas leak for natural gas tank, stove, fireplace, cooktop, heater, burner, dryer, oven, cooker, propane lantern. Applies to measure and search for flammable gas, mines, construction projects, safety check of gas appliance, oil spill
Notes
1. It is necessary to power the gas leak instrument on for 5-10 minutes before measurement if long time no use.
2. Please power off the monitor before replacing batteries.
3.The measurement process is to convert electrochemical signal to digital signal, the display may delay 1-2 seconds.
4. The screw hole on the back of the monitor is used to install belt clip (not included).
5. The readings show the real-time concentration of combustible gas, it is not fixed but constantly changing.
Gas Leak Monitor for Natural Gas, DEEPLITE Portable Combustible Gas Leak Sniffer Detector, Methane RV Propane Gas Leak Sensor Instrument with Digital Concentration Display, Battery Operated
Current Price
$23.99
Average
$23.99
Min Price
$23.99
Max Price
$23.99
Description
Product Details
Preheating Time: 30 seconds
Range: 0 ~ 9999 ppm
Resolution: 1 ppm
Sense Type: Sound and light
Exceed Level: 2000 ppm
Battery Powered: 3 x AAA alkaline batteries
Operation Environment: 32-122℉, 15% ~ 90%
Combustible Gas Like : Natural gas, coal gas, methane and other combustible gas
Package Included: 1 x Gas Leak Monitor + 1 x User Manual
Operation Guide
1)Install Batteries: Install batteries correctly.
2)Power On: Press "Power" button (middle) for 2 seconds until the screen lights up and display "1.0.0" version number.
3)Warming-Up: The screen will count down 30 seconds to preheat. Press "Skip" button (right) can skip this process.
4)Measurement: Start measurement after preheating
5)Reset: Press "Clear" button (left) for 2 seconds
6)Shut Down: Press "Power" button for 2 seconds. This tester is a big consumer of power, please remember to power it off after use.
7)Replace Batteries: When the battery voltage is low, the screen will displays "----" flashing symbols warning. Replace batteries in time.
Widespread Use
You can check gas leak for natural gas tank, stove, fireplace, cooktop, heater, burner, dryer, oven, cooker, propane lantern. Applies to measure and search for flammable gas, mines, construction projects, safety check of gas appliance, oil spill
Notes
1. It is necessary to power the gas leak instrument on for 5-10 minutes before measurement if long time no use.
2. Please power off the monitor before replacing batteries.
3.The measurement process is to convert electrochemical signal to digital signal, the display may delay 1-2 seconds.
4. The screw hole on the back of the monitor is used to install belt clip (not included).
5. The readings show the real-time concentration of combustible gas, it is not fixed but constantly changing.
Preheating Time: 30 seconds
Range: 0 ~ 9999 ppm
Resolution: 1 ppm
Sense Type: Sound and light
Exceed Level: 2000 ppm
Battery Powered: 3 x AAA alkaline batteries
Operation Environment: 32-122℉, 15% ~ 90%
Combustible Gas Like : Natural gas, coal gas, methane and other combustible gas
Package Included: 1 x Gas Leak Monitor + 1 x User Manual
Operation Guide
1)Install Batteries: Install batteries correctly.
2)Power On: Press "Power" button (middle) for 2 seconds until the screen lights up and display "1.0.0" version number.
3)Warming-Up: The screen will count down 30 seconds to preheat. Press "Skip" button (right) can skip this process.
4)Measurement: Start measurement after preheating
5)Reset: Press "Clear" button (left) for 2 seconds
6)Shut Down: Press "Power" button for 2 seconds. This tester is a big consumer of power, please remember to power it off after use.
7)Replace Batteries: When the battery voltage is low, the screen will displays "----" flashing symbols warning. Replace batteries in time.
Widespread Use
You can check gas leak for natural gas tank, stove, fireplace, cooktop, heater, burner, dryer, oven, cooker, propane lantern. Applies to measure and search for flammable gas, mines, construction projects, safety check of gas appliance, oil spill
Notes
1. It is necessary to power the gas leak instrument on for 5-10 minutes before measurement if long time no use.
2. Please power off the monitor before replacing batteries.
3.The measurement process is to convert electrochemical signal to digital signal, the display may delay 1-2 seconds.
4. The screw hole on the back of the monitor is used to install belt clip (not included).
5. The readings show the real-time concentration of combustible gas, it is not fixed but constantly changing.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
