Description
Technical Parameter:
Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range:-10℃~+70℃
Interface Type: Analog Signal Output
Item Size: 30mm x 23mm
GPIO:
S; signal output,
+; power supply (VCC),
-; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
Gnd: Negative electrode of the piezoelectric ceramic
Features:
1. S-port is connected with the controller's analog input pin.
2. 5V and GND are respectively connected the power supply of + 5V and GND.
3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range:-10℃~+70℃
Interface Type: Analog Signal Output
Item Size: 30mm x 23mm
GPIO:
S; signal output,
+; power supply (VCC),
-; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
Gnd: Negative electrode of the piezoelectric ceramic
Features:
1. S-port is connected with the controller's analog input pin.
2. 5V and GND are respectively connected the power supply of + 5V and GND.
3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Gikfun Analog Ceramic Piezo Vibration Sensor Module for Arduino DIY Kit (Case Pack of 5pcs) EK1952
Price is below average
Current Price
$9.98
Average
$10.48
Min Price
$9.98
Max Price
$10.98
Price dynamics
5%
Description
Technical Parameter:
Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range:-10℃~+70℃
Interface Type: Analog Signal Output
Item Size: 30mm x 23mm
GPIO:
S; signal output,
+; power supply (VCC),
-; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
Gnd: Negative electrode of the piezoelectric ceramic
Features:
1. S-port is connected with the controller's analog input pin.
2. 5V and GND are respectively connected the power supply of + 5V and GND.
3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range:-10℃~+70℃
Interface Type: Analog Signal Output
Item Size: 30mm x 23mm
GPIO:
S; signal output,
+; power supply (VCC),
-; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
Gnd: Negative electrode of the piezoelectric ceramic
Features:
1. S-port is connected with the controller's analog input pin.
2. 5V and GND are respectively connected the power supply of + 5V and GND.
3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
