Description
Brand new, high quality and good operation.
Fit for 2014 2015 2016 Toyota Camry Corolla RAV4 Prius C 6.1" radios (Non JBL & Non navigation).
Size: 6.1 inch (150*84mm). (Not 7.0 inch)
Connector interface: 12-Pin. (Not 8-Pin)
Thickness: 1.5mm
Length of FPC (flexible print circuit) / Connector ribbon: 33mm.
Working voltage: 5V.
Special feature: Support Can-Bus.
Main material: Glass.
TFT (LCD) technology.
Replace touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off.
Compatible with the following vehicles with BASIC AUDIO SYSTEM (Radios made by fujitsu ten):
2014 ~ 2016 RAV4
2014 ~ 2016 Prius C
2014 ~ 2016 Corolla
2014 1/2- 2016 Camry (won't work on Camry of the early 2014)
Attention:
1.It is 6.1'' touch screen with 12-pins connector interface, not 6.1'' screen with 8-pins connector, not 7.0'' screen with 12-pins connector. Please check your original
touch screen carefully before buying to make sure our this screen will fit your device.
2.It is only a touch screen digitizer panel, not including a LCD display / entire head unit.
3.Installation instructions, tools and double side adhesive tape are not included in this package/order.
4.There is a layer of protective film on the surface of the panel. Please remove it before using it.
Package includes:
1x Touch screen digitizer
(Shipped from USA)
Fit for 2014 2015 2016 Toyota Camry Corolla RAV4 Prius C 6.1" radios (Non JBL & Non navigation).
Size: 6.1 inch (150*84mm). (Not 7.0 inch)
Connector interface: 12-Pin. (Not 8-Pin)
Thickness: 1.5mm
Length of FPC (flexible print circuit) / Connector ribbon: 33mm.
Working voltage: 5V.
Special feature: Support Can-Bus.
Main material: Glass.
TFT (LCD) technology.
Replace touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off.
Compatible with the following vehicles with BASIC AUDIO SYSTEM (Radios made by fujitsu ten):
2014 ~ 2016 RAV4
2014 ~ 2016 Prius C
2014 ~ 2016 Corolla
2014 1/2- 2016 Camry (won't work on Camry of the early 2014)
Attention:
1.It is 6.1'' touch screen with 12-pins connector interface, not 6.1'' screen with 8-pins connector, not 7.0'' screen with 12-pins connector. Please check your original
touch screen carefully before buying to make sure our this screen will fit your device.
2.It is only a touch screen digitizer panel, not including a LCD display / entire head unit.
3.Installation instructions, tools and double side adhesive tape are not included in this package/order.
4.There is a layer of protective film on the surface of the panel. Please remove it before using it.
Package includes:
1x Touch screen digitizer
(Shipped from USA)
GZTAUTO Touch Screen Digitizer Glass Panel Fit for Toyota Corolla Camry RAV4 Prius C Radio 6.1" 2014-2016
Current Price
$65
Average
$65
Min Price
$65
Max Price
$65
Description
Brand new, high quality and good operation.
Fit for 2014 2015 2016 Toyota Camry Corolla RAV4 Prius C 6.1" radios (Non JBL & Non navigation).
Size: 6.1 inch (150*84mm). (Not 7.0 inch)
Connector interface: 12-Pin. (Not 8-Pin)
Thickness: 1.5mm
Length of FPC (flexible print circuit) / Connector ribbon: 33mm.
Working voltage: 5V.
Special feature: Support Can-Bus.
Main material: Glass.
TFT (LCD) technology.
Replace touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off.
Compatible with the following vehicles with BASIC AUDIO SYSTEM (Radios made by fujitsu ten):
2014 ~ 2016 RAV4
2014 ~ 2016 Prius C
2014 ~ 2016 Corolla
2014 1/2- 2016 Camry (won't work on Camry of the early 2014)
Attention:
1.It is 6.1'' touch screen with 12-pins connector interface, not 6.1'' screen with 8-pins connector, not 7.0'' screen with 12-pins connector. Please check your original
touch screen carefully before buying to make sure our this screen will fit your device.
2.It is only a touch screen digitizer panel, not including a LCD display / entire head unit.
3.Installation instructions, tools and double side adhesive tape are not included in this package/order.
4.There is a layer of protective film on the surface of the panel. Please remove it before using it.
Package includes:
1x Touch screen digitizer
(Shipped from USA)
Fit for 2014 2015 2016 Toyota Camry Corolla RAV4 Prius C 6.1" radios (Non JBL & Non navigation).
Size: 6.1 inch (150*84mm). (Not 7.0 inch)
Connector interface: 12-Pin. (Not 8-Pin)
Thickness: 1.5mm
Length of FPC (flexible print circuit) / Connector ribbon: 33mm.
Working voltage: 5V.
Special feature: Support Can-Bus.
Main material: Glass.
TFT (LCD) technology.
Replace touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off.
Compatible with the following vehicles with BASIC AUDIO SYSTEM (Radios made by fujitsu ten):
2014 ~ 2016 RAV4
2014 ~ 2016 Prius C
2014 ~ 2016 Corolla
2014 1/2- 2016 Camry (won't work on Camry of the early 2014)
Attention:
1.It is 6.1'' touch screen with 12-pins connector interface, not 6.1'' screen with 8-pins connector, not 7.0'' screen with 12-pins connector. Please check your original
touch screen carefully before buying to make sure our this screen will fit your device.
2.It is only a touch screen digitizer panel, not including a LCD display / entire head unit.
3.Installation instructions, tools and double side adhesive tape are not included in this package/order.
4.There is a layer of protective film on the surface of the panel. Please remove it before using it.
Package includes:
1x Touch screen digitizer
(Shipped from USA)
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
