Description
Description
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 5~25VDC, and output voltage is equal to input voltage. High sensitivity, Easy to install.
Automatic Induction
When people enter into the sensing range, Motion sensor will output a voltage equal to input voltage, after the delay time, it will output 0V; During the delay time if motion detected, the delay time will reset, and start a new delay time.
Application
Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
< Specification
Passive Infrared Sensor
Operating voltage DC: 12V
Load current : 3A
Delay time: Default setting 5-25s (2~280 Seconds adjustable)
Detecting range ≤ 110 degrees cone angle
Detecting distance4M-7M (10cm-7M adjustable)
Trigger way : Continuous triggering
Blockade time: 0 seconds
Size: 48*25*14 mm
Delay time adjustment: Clock-wise reduce the delay time , Anticlockwise increase the delay time
Sensor distance adjustment: Clock-wise increase the Sensor distance, Anticlockwise reduce the Sensor distance
Note:
1. The PIR Sensor requires a 'warm-up' time in order to function properly, about 10 s to1 min, depending on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
2. Don't expose the Sensor Switch to direct sun light /lighting, big wind, or placing near to a heater or air condition.
3. Don't fix the item at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
4. Don't fix the motion sensor switch in strong shock or vibration environment.
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 5~25VDC, and output voltage is equal to input voltage. High sensitivity, Easy to install.
Automatic Induction
When people enter into the sensing range, Motion sensor will output a voltage equal to input voltage, after the delay time, it will output 0V; During the delay time if motion detected, the delay time will reset, and start a new delay time.
Application
Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
< Specification
Passive Infrared Sensor
Operating voltage DC: 12V
Load current : 3A
Delay time: Default setting 5-25s (2~280 Seconds adjustable)
Detecting range ≤ 110 degrees cone angle
Detecting distance4M-7M (10cm-7M adjustable)
Trigger way : Continuous triggering
Blockade time: 0 seconds
Size: 48*25*14 mm
Delay time adjustment: Clock-wise reduce the delay time , Anticlockwise increase the delay time
Sensor distance adjustment: Clock-wise increase the Sensor distance, Anticlockwise reduce the Sensor distance
Note:
1. The PIR Sensor requires a 'warm-up' time in order to function properly, about 10 s to1 min, depending on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
2. Don't expose the Sensor Switch to direct sun light /lighting, big wind, or placing near to a heater or air condition.
3. Don't fix the item at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
4. Don't fix the motion sensor switch in strong shock or vibration environment.
Sensky BS010H 12v 24v 3a Motion Activated Sensor Switch, PIR Motion Sensor Switch with Long Distance and Time Adjustable, Black(Without Light Sensor)
Price is below average
Current Price
$10.99
Average
$11.68
Min Price
$8.99
Max Price
$15.99
Price dynamics
6%
Description
Description
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 5~25VDC, and output voltage is equal to input voltage. High sensitivity, Easy to install.
Automatic Induction
When people enter into the sensing range, Motion sensor will output a voltage equal to input voltage, after the delay time, it will output 0V; During the delay time if motion detected, the delay time will reset, and start a new delay time.
Application
Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
< Specification
Passive Infrared Sensor
Operating voltage DC: 12V
Load current : 3A
Delay time: Default setting 5-25s (2~280 Seconds adjustable)
Detecting range ≤ 110 degrees cone angle
Detecting distance4M-7M (10cm-7M adjustable)
Trigger way : Continuous triggering
Blockade time: 0 seconds
Size: 48*25*14 mm
Delay time adjustment: Clock-wise reduce the delay time , Anticlockwise increase the delay time
Sensor distance adjustment: Clock-wise increase the Sensor distance, Anticlockwise reduce the Sensor distance
Note:
1. The PIR Sensor requires a 'warm-up' time in order to function properly, about 10 s to1 min, depending on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
2. Don't expose the Sensor Switch to direct sun light /lighting, big wind, or placing near to a heater or air condition.
3. Don't fix the item at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
4. Don't fix the motion sensor switch in strong shock or vibration environment.
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 5~25VDC, and output voltage is equal to input voltage. High sensitivity, Easy to install.
Automatic Induction
When people enter into the sensing range, Motion sensor will output a voltage equal to input voltage, after the delay time, it will output 0V; During the delay time if motion detected, the delay time will reset, and start a new delay time.
Application
Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
< Specification
Passive Infrared Sensor
Operating voltage DC: 12V
Load current : 3A
Delay time: Default setting 5-25s (2~280 Seconds adjustable)
Detecting range ≤ 110 degrees cone angle
Detecting distance4M-7M (10cm-7M adjustable)
Trigger way : Continuous triggering
Blockade time: 0 seconds
Size: 48*25*14 mm
Delay time adjustment: Clock-wise reduce the delay time , Anticlockwise increase the delay time
Sensor distance adjustment: Clock-wise increase the Sensor distance, Anticlockwise reduce the Sensor distance
Note:
1. The PIR Sensor requires a 'warm-up' time in order to function properly, about 10 s to1 min, depending on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
2. Don't expose the Sensor Switch to direct sun light /lighting, big wind, or placing near to a heater or air condition.
3. Don't fix the item at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
4. Don't fix the motion sensor switch in strong shock or vibration environment.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
