Description
Features:
Reset Switch: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection
Pulse Relay Selection: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop
Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles
Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops
Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay .
Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods .
Specifications:
Supply voltage:220VAC
Power:4.5VA
Output relays:240V/5A
Operating temperature:-20~65°C
Storage temperature:-40~85°C
Frequency range:20 kHz to 170 kHz
Temperature compensation:50°C/ h
Reaction time:10ms
Signal holding time:Unlimited/limited
Sensitivity:
Higher : 0.02% high:0.05%
low:0.1% lower:0.5%
Loop inductance
Total loop plus connection wiring:
50μH to 1000μH. Ideal is 100μH to 300μH
Loop connection wiring:200 meters long.
The total resistance is less than 80hm, twisted at least 20 times per meter
Relative humidity:<90%No condensation
Weight:283g
Package included:
1 × Vehicle Loop Detector
1 × manual
Reset Switch: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection
Pulse Relay Selection: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop
Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles
Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops
Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay .
Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods .
Specifications:
Supply voltage:220VAC
Power:4.5VA
Output relays:240V/5A
Operating temperature:-20~65°C
Storage temperature:-40~85°C
Frequency range:20 kHz to 170 kHz
Temperature compensation:50°C/ h
Reaction time:10ms
Signal holding time:Unlimited/limited
Sensitivity:
Higher : 0.02% high:0.05%
low:0.1% lower:0.5%
Loop inductance
Total loop plus connection wiring:
50μH to 1000μH. Ideal is 100μH to 300μH
Loop connection wiring:200 meters long.
The total resistance is less than 80hm, twisted at least 20 times per meter
Relative humidity:<90%No condensation
Weight:283g
Package included:
1 × Vehicle Loop Detector
1 × manual
Vehicle Loop Detector, Single Channel Loop Detector PD132 Car Detector Car Parking Lot Inductive Vehicle Detector
Price is below average
Current Price
$17.99
Average
$19.38
Min Price
$17.99
Max Price
$20.49
Price dynamics
7%
Description
Features:
Reset Switch: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection
Pulse Relay Selection: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop
Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles
Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops
Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay .
Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods .
Specifications:
Supply voltage:220VAC
Power:4.5VA
Output relays:240V/5A
Operating temperature:-20~65°C
Storage temperature:-40~85°C
Frequency range:20 kHz to 170 kHz
Temperature compensation:50°C/ h
Reaction time:10ms
Signal holding time:Unlimited/limited
Sensitivity:
Higher : 0.02% high:0.05%
low:0.1% lower:0.5%
Loop inductance
Total loop plus connection wiring:
50μH to 1000μH. Ideal is 100μH to 300μH
Loop connection wiring:200 meters long.
The total resistance is less than 80hm, twisted at least 20 times per meter
Relative humidity:<90%No condensation
Weight:283g
Package included:
1 × Vehicle Loop Detector
1 × manual
Reset Switch: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection
Pulse Relay Selection: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop
Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles
Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops
Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay .
Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods .
Specifications:
Supply voltage:220VAC
Power:4.5VA
Output relays:240V/5A
Operating temperature:-20~65°C
Storage temperature:-40~85°C
Frequency range:20 kHz to 170 kHz
Temperature compensation:50°C/ h
Reaction time:10ms
Signal holding time:Unlimited/limited
Sensitivity:
Higher : 0.02% high:0.05%
low:0.1% lower:0.5%
Loop inductance
Total loop plus connection wiring:
50μH to 1000μH. Ideal is 100μH to 300μH
Loop connection wiring:200 meters long.
The total resistance is less than 80hm, twisted at least 20 times per meter
Relative humidity:<90%No condensation
Weight:283g
Package included:
1 × Vehicle Loop Detector
1 × manual
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
training video for the pd-130 inductive loop vehicle detector the pd-130 is a single-channel microprocessor base detector designed specifically for parking and vehicle access control applications there are other products available for high speed and motorway operation it should be noted that there are look-alike products sold in this market not manufactured by nortec the information in this video may not be necessarily correct for any look-alike product check for the emboss nor tech logo on the detector housing to confirm that it is a nortec product principle of operation an inductive loop vehicle detector senses the presence of a vehicle over an area defined by a loop of two or more turns of wire laid under the road or pavement surface a vehicle passing over a sensing loop is sensed by the detector upon detection of a vehicle the detector operates output relays which may be used to ini


Similar products
