Description

The 5643 kit is a one door 600lbs Maglock Access Control Kit for doors that open in with request to exit PIR. This system is mainly used to give access to a certain room, office or building (depending on your application) to certain people. With the outdoor slim keypad, the VIS-3005, you can gain access through three different options. You can enter a pin code onto the keypad, use a proximity card, and/or use a proximity key tag. This keypad will allow up to 2000 users through either of the three access options. Since this is a standalone system, meaning that there is no software, it is recommended for you to keep a record of all personnel and their assigned user ID with key code, key card or key tag. On the keypad, you will notice a doorbell towards the bottom. This will allow people from the outside to ring the doorbell and notify those inside that there is someone wanting to come in. Once someone has entered a programmed code, card, or tag, the maglock will disengage and allow for entrance. The lock will then engage again and remain closed until it is unlocked by one of the three access options. The VIS-7005 exit button will allow those from within the facility to exit when they push the button. Through the outdoor keypad, you can program your delay from 0 to 99 seconds. The meaning of having a delay is setting a time until the maglock engages again. The popular applications for this kit is for offices, commercial buildings or any room that needs restricted access. The request to exit PIR included in the kit allows for the door to unlock when it senses motion within 2.4m. This kit has a 3 year warranty with full access to tech support in the USA!

Visionis FPC-5643 One Door Access Control Inswinging Door 600lbs Maglock with VIS-3005 Slim Indoor Outdoor Rated IP68 Keypad/Reader Standalone EM No Software 2000 Users with PIR Kit

Price is below average

Get price

Current Price

$284.67

Average

$287.17

Min Price

$284.67

Max Price

$299.65

Price dynamics

Description

According to the data, price will be lower in next two weeks, so not waste your money and track better price!

Product review & video

FPC is proud to introduce our outdoor keypad / reader mag lock exit button and doorbell kits for proper insulation please make sure that you have the following diagrams and installation manuals for each individual product on hand warning please read carefully it is recommended to use electrical wire for this installation 18/2 or 20/2 gauge wire would be sufficient this wire is a requirement that is needed to connect the mag lock receiver and exit button you may also use this wire as an extension for the power supplies before purchasing or installing this kit you will need to check and comply with your local fire authority to make sure you comply with fire code compliance each state has different laws we are not responsible for improper installation of this kit this video is an example of how it should be installed but all applications are different if you are not handy with electrical c