This powerful infrared motion sensor speaker is easily updateable through the USB port, a great addition for Halloween! You can record your own custom sounds that will play back when the sensor is triggered. Since this is an infrared sensor, it can work in total darkness; it does not rely on someone breaking the plane of light in order to be triggered like most props.

Record your sound(s) as mp3 file onto a standard SD card and play them back from that or download them to the internal memory.

You can record multiple sounds and then choose to either play one only over and over each time the speaker is triggered, or you can have the sounds play in succession each time the sensor is activated.

Many uses! Speaker can stand on it's own or be hung on the wall.

Features:

• Human body induction. Wide detecting range.
• Load MP3 audio files very easily, not need any assistant tool or software.
• Storage medium: Built in 4MB Flash memory, or insert SD card to play. Support max 2G SD card.
• Support voice replacement. Update audio via USB flash disk.
• Two play modes: sequential play in a loop and single cycle.
• Loud voice broadcast, 10 levels of volume control, volume can be adjusted.
• Power-off memory function.

Parameters

• Power supply: DC12V
• Operating current: standby state ≤ 60mA, play state ≤ 600mA 
• Audio format: MP3, bit rate: 8 ~ 320Kbps
• Audio output power: 8Ω/ 10W (typical)
• Infrared sensor range ≤ 5 m (120 ° angle)
• Volume ≤100db

Accessories: Powersound speaker, US plug power adapter