- HomeToys & GamesHobbiesRemote & App Controlled Vehicles & PartsRemote & App Controlled Vehicle PartsPower Plant & Driveline SystemsElectric Speed Controllers
Description
Acro: Standard model for racing / acro flying.
Features
No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork ( Deluxe).
Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
ARM-Cortex M4 core.
Stackable design - perfect for integrating with OSDs and power distribution boards.
16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required(built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Dedicated I2C port for connection of OLED display without needing flight battery.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
Buzzer port for audible warnings and notifications.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Symmetrical design for a super tidy wiring. Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
Please Note:
If there is any problem, please don't hesitate to contact with us.
Features
No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork ( Deluxe).
Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
ARM-Cortex M4 core.
Stackable design - perfect for integrating with OSDs and power distribution boards.
16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required(built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Dedicated I2C port for connection of OLED display without needing flight battery.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
Buzzer port for audible warnings and notifications.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Symmetrical design for a super tidy wiring. Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
Please Note:
If there is any problem, please don't hesitate to contact with us.
YoungRC Pro SP Racing Acro 6DOF F3 Flight Control Board F3 Flight Controller with Protective Case for Mini 210 250 FPV RC Drone Quadcopter
Current Price
$19.99
Average
$19.48
Min Price
$17.99
Max Price
$21.89
Price dynamics
3%
Description
Acro: Standard model for racing / acro flying.
Features
No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork ( Deluxe).
Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
ARM-Cortex M4 core.
Stackable design - perfect for integrating with OSDs and power distribution boards.
16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required(built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Dedicated I2C port for connection of OLED display without needing flight battery.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
Buzzer port for audible warnings and notifications.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Symmetrical design for a super tidy wiring. Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
Please Note:
If there is any problem, please don't hesitate to contact with us.
Features
No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork ( Deluxe).
Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
ARM-Cortex M4 core.
Stackable design - perfect for integrating with OSDs and power distribution boards.
16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required(built-in).
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Dedicated I2C port for connection of OLED display without needing flight battery.
Battery monitoring ports for voltage and current.
Sonar support for precision low-altitude hold.
Buzzer port for audible warnings and notifications.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Symmetrical design for a super tidy wiring. Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
Please Note:
If there is any problem, please don't hesitate to contact with us.
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products