3/8in X 24in Masonry Drill Bit

with the right tools and proper technique drilling into masonry and concrete is easier than you think here's what you'll need to get the job done [Music] first mark the spot where you want to drill the hole next set the depth stop on the drill 1/4 inch longer than the depth needed for the hole then fit the hammer drill with a carbide masonry bit in the appropriate size to make a guide hole grip the drill in one hand and brace the tool with the other using the handle or back of the drill position the bed and start the drill at its lowest speed while pushing forward with steady pressure until you reach 1/4 inch depth occasionally pull out the bit and blow or vacuum out the dust now replace the drill in the guide hole and run it at medium speed stop when the desired depth is reached to finish up the process simply add your hanging hardware per product guidelines [Music] good luck and thank