- HomeAutomotiveTires & WheelsAccessories & PartsTire Pressure Monitoring Systems (TPMS)Aftermarket Systems
Description
The Tire Pressure Monitoring System could monitor tire dynamic pressure, which helps you avoid tires puncture and leakage, save fuel, reduce tire wear and increase traffic safety.
Kindly note:
1. Available for 4 tires household vehicles, sport cars, trailers, trucks which tire pressure range is 0 to 50.75 PSI up to 19 ft(6 meters).
Sensor signal distance: The normal distance is 10-16 ft(3-5 meters). Beyond 10 meters (33 ft), the signal would not be clear.
2.You should use the included sensors, not factory (OEM) sensors. Or it won't work with the monitor.
3.Please refer to the detailed instruction manual. Any questions, please feel free to contact us via our customers service email bqtech_service@126.com.
Specification:
1. Default alarm value: 29 Psi-43.5 Psi/ 2 Bar-3 Bar. The high alarm value could be customized between 1.1 Bar-3.5 Bar /15.95 Psi-50.75 Psi. Pressure Sensitivity: +/-0.1 Bar (1.5 Psi)
2. Temperature monitoring:-40 ℃-+130℃.Only alert if the temp is higher than the default value 70℃(158℉). The temp alarm value also can be customized between 60℃-90℃(140℉-194℉).
7 Steps for DIY Sensors Installation:
1.Plug monitor into cigarette lighter hole, turn on monitor
2.Unscrew the valve cap
3.Screw in the hexagon nut
4.Put in the washer
5.Insert and tighten the sensor
6.Tighten up the hexagon nut to the sensor following reverse direction with spanner
7.Test air leakage with soapy water
Note.Need to remove sensor and nut whenever you will want to add air
Package Contains:
1 x Tire Pressure Monitor
4 x Tire Pressure Sensor
1 x Opener End Wrench
1 x Hexagon nut wrench
4 x Hexagon nut
1 x Silica gel ring
1 x English instruction manual
Kindly note:
1. Available for 4 tires household vehicles, sport cars, trailers, trucks which tire pressure range is 0 to 50.75 PSI up to 19 ft(6 meters).
Sensor signal distance: The normal distance is 10-16 ft(3-5 meters). Beyond 10 meters (33 ft), the signal would not be clear.
2.You should use the included sensors, not factory (OEM) sensors. Or it won't work with the monitor.
3.Please refer to the detailed instruction manual. Any questions, please feel free to contact us via our customers service email bqtech_service@126.com.
Specification:
1. Default alarm value: 29 Psi-43.5 Psi/ 2 Bar-3 Bar. The high alarm value could be customized between 1.1 Bar-3.5 Bar /15.95 Psi-50.75 Psi. Pressure Sensitivity: +/-0.1 Bar (1.5 Psi)
2. Temperature monitoring:-40 ℃-+130℃.Only alert if the temp is higher than the default value 70℃(158℉). The temp alarm value also can be customized between 60℃-90℃(140℉-194℉).
7 Steps for DIY Sensors Installation:
1.Plug monitor into cigarette lighter hole, turn on monitor
2.Unscrew the valve cap
3.Screw in the hexagon nut
4.Put in the washer
5.Insert and tighten the sensor
6.Tighten up the hexagon nut to the sensor following reverse direction with spanner
7.Test air leakage with soapy water
Note.Need to remove sensor and nut whenever you will want to add air
Package Contains:
1 x Tire Pressure Monitor
4 x Tire Pressure Sensor
1 x Opener End Wrench
1 x Hexagon nut wrench
4 x Hexagon nut
1 x Silica gel ring
1 x English instruction manual
B-Qtech Wireless TPMS Tire Pressure Monitoring System with TPMS 4 Sensors and USB Charging Port Real-time Display of Temperature and Pressure and Alarm Function
Price is below average
Current Price
$54.99
Average
$68.43
Min Price
$54.99
Max Price
$99.99
Price dynamics
20%
Description
The Tire Pressure Monitoring System could monitor tire dynamic pressure, which helps you avoid tires puncture and leakage, save fuel, reduce tire wear and increase traffic safety.
Kindly note:
1. Available for 4 tires household vehicles, sport cars, trailers, trucks which tire pressure range is 0 to 50.75 PSI up to 19 ft(6 meters).
Sensor signal distance: The normal distance is 10-16 ft(3-5 meters). Beyond 10 meters (33 ft), the signal would not be clear.
2.You should use the included sensors, not factory (OEM) sensors. Or it won't work with the monitor.
3.Please refer to the detailed instruction manual. Any questions, please feel free to contact us via our customers service email bqtech_service@126.com.
Specification:
1. Default alarm value: 29 Psi-43.5 Psi/ 2 Bar-3 Bar. The high alarm value could be customized between 1.1 Bar-3.5 Bar /15.95 Psi-50.75 Psi. Pressure Sensitivity: +/-0.1 Bar (1.5 Psi)
2. Temperature monitoring:-40 ℃-+130℃.Only alert if the temp is higher than the default value 70℃(158℉). The temp alarm value also can be customized between 60℃-90℃(140℉-194℉).
7 Steps for DIY Sensors Installation:
1.Plug monitor into cigarette lighter hole, turn on monitor
2.Unscrew the valve cap
3.Screw in the hexagon nut
4.Put in the washer
5.Insert and tighten the sensor
6.Tighten up the hexagon nut to the sensor following reverse direction with spanner
7.Test air leakage with soapy water
Note.Need to remove sensor and nut whenever you will want to add air
Package Contains:
1 x Tire Pressure Monitor
4 x Tire Pressure Sensor
1 x Opener End Wrench
1 x Hexagon nut wrench
4 x Hexagon nut
1 x Silica gel ring
1 x English instruction manual
Kindly note:
1. Available for 4 tires household vehicles, sport cars, trailers, trucks which tire pressure range is 0 to 50.75 PSI up to 19 ft(6 meters).
Sensor signal distance: The normal distance is 10-16 ft(3-5 meters). Beyond 10 meters (33 ft), the signal would not be clear.
2.You should use the included sensors, not factory (OEM) sensors. Or it won't work with the monitor.
3.Please refer to the detailed instruction manual. Any questions, please feel free to contact us via our customers service email bqtech_service@126.com.
Specification:
1. Default alarm value: 29 Psi-43.5 Psi/ 2 Bar-3 Bar. The high alarm value could be customized between 1.1 Bar-3.5 Bar /15.95 Psi-50.75 Psi. Pressure Sensitivity: +/-0.1 Bar (1.5 Psi)
2. Temperature monitoring:-40 ℃-+130℃.Only alert if the temp is higher than the default value 70℃(158℉). The temp alarm value also can be customized between 60℃-90℃(140℉-194℉).
7 Steps for DIY Sensors Installation:
1.Plug monitor into cigarette lighter hole, turn on monitor
2.Unscrew the valve cap
3.Screw in the hexagon nut
4.Put in the washer
5.Insert and tighten the sensor
6.Tighten up the hexagon nut to the sensor following reverse direction with spanner
7.Test air leakage with soapy water
Note.Need to remove sensor and nut whenever you will want to add air
Package Contains:
1 x Tire Pressure Monitor
4 x Tire Pressure Sensor
1 x Opener End Wrench
1 x Hexagon nut wrench
4 x Hexagon nut
1 x Silica gel ring
1 x English instruction manual
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
