Description
The JustBoom DAC HAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi. Stack the add-on board onto your Raspberry Pi A+, B+, 2B or the new 3B and it's ready to use!
The DAC HAT incorporates a 384kHz/32bit DAC chip with hardware volume mixing as well as a 138mW headphone amplifier (note that the Raspberry Pi is only capable of a 192kHz/32bit output). Outputs are line level over RCA and headphone amplified over 3.5mm jack cable. The HAT uses the I2S interface for its audio input to reduce CPU load on the Raspberry Pi compared to USB solutions. It is also powered directly from the GPIO header so no extra cables or power supplies are required. All of the GPIO pins are still accessible on the DAC HAT for further customisation of your project.
Features
• Full high quality audio - 384kHz / 32bit
• Includes both a DAC (digital to analog converter) and headphone amplifier
• Line-level RCA and headphone amplified 3.5mm jack outputs
• Plug and play compatibility for ease of use
• Hardware and software volume control from your Raspberry Pi
• No soldering required
• Powered by the Raspberry Pi GPIO header
• Compatible with Raspberry Pi A+,B+, 2B and the new 3B (and also compatible with the Raspberry Pi Zero, but we would recommend the JustBoom DAC Zero for this purpose)
• Mounting hardware included
• Optional IR receiver included in package
• Compatible with the JustBoom Amp which can easily stack on top of the DAC HAT to add amplification and extra outputs!
• All Raspberry Pi GPIO pins still accessible via 40pin unpopulated extension header
• Our Raspberry Pi DAC is fully HAT compliant
• Full driver support in Raspbian
• Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
The DAC HAT incorporates a 384kHz/32bit DAC chip with hardware volume mixing as well as a 138mW headphone amplifier (note that the Raspberry Pi is only capable of a 192kHz/32bit output). Outputs are line level over RCA and headphone amplified over 3.5mm jack cable. The HAT uses the I2S interface for its audio input to reduce CPU load on the Raspberry Pi compared to USB solutions. It is also powered directly from the GPIO header so no extra cables or power supplies are required. All of the GPIO pins are still accessible on the DAC HAT for further customisation of your project.
Features
• Full high quality audio - 384kHz / 32bit
• Includes both a DAC (digital to analog converter) and headphone amplifier
• Line-level RCA and headphone amplified 3.5mm jack outputs
• Plug and play compatibility for ease of use
• Hardware and software volume control from your Raspberry Pi
• No soldering required
• Powered by the Raspberry Pi GPIO header
• Compatible with Raspberry Pi A+,B+, 2B and the new 3B (and also compatible with the Raspberry Pi Zero, but we would recommend the JustBoom DAC Zero for this purpose)
• Mounting hardware included
• Optional IR receiver included in package
• Compatible with the JustBoom Amp which can easily stack on top of the DAC HAT to add amplification and extra outputs!
• All Raspberry Pi GPIO pins still accessible via 40pin unpopulated extension header
• Our Raspberry Pi DAC is fully HAT compliant
• Full driver support in Raspbian
• Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
DAC HAT Digital-to-Analog Converter for the Raspberry Pi (384kHz/32bit, line out, headphones out)
Current Price
$44.95
Average
$41.78
Min Price
$39.48
Max Price
$44.95
Price dynamics
7%
Description
The JustBoom DAC HAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi. Stack the add-on board onto your Raspberry Pi A+, B+, 2B or the new 3B and it's ready to use!
The DAC HAT incorporates a 384kHz/32bit DAC chip with hardware volume mixing as well as a 138mW headphone amplifier (note that the Raspberry Pi is only capable of a 192kHz/32bit output). Outputs are line level over RCA and headphone amplified over 3.5mm jack cable. The HAT uses the I2S interface for its audio input to reduce CPU load on the Raspberry Pi compared to USB solutions. It is also powered directly from the GPIO header so no extra cables or power supplies are required. All of the GPIO pins are still accessible on the DAC HAT for further customisation of your project.
Features
• Full high quality audio - 384kHz / 32bit
• Includes both a DAC (digital to analog converter) and headphone amplifier
• Line-level RCA and headphone amplified 3.5mm jack outputs
• Plug and play compatibility for ease of use
• Hardware and software volume control from your Raspberry Pi
• No soldering required
• Powered by the Raspberry Pi GPIO header
• Compatible with Raspberry Pi A+,B+, 2B and the new 3B (and also compatible with the Raspberry Pi Zero, but we would recommend the JustBoom DAC Zero for this purpose)
• Mounting hardware included
• Optional IR receiver included in package
• Compatible with the JustBoom Amp which can easily stack on top of the DAC HAT to add amplification and extra outputs!
• All Raspberry Pi GPIO pins still accessible via 40pin unpopulated extension header
• Our Raspberry Pi DAC is fully HAT compliant
• Full driver support in Raspbian
• Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
The DAC HAT incorporates a 384kHz/32bit DAC chip with hardware volume mixing as well as a 138mW headphone amplifier (note that the Raspberry Pi is only capable of a 192kHz/32bit output). Outputs are line level over RCA and headphone amplified over 3.5mm jack cable. The HAT uses the I2S interface for its audio input to reduce CPU load on the Raspberry Pi compared to USB solutions. It is also powered directly from the GPIO header so no extra cables or power supplies are required. All of the GPIO pins are still accessible on the DAC HAT for further customisation of your project.
Features
• Full high quality audio - 384kHz / 32bit
• Includes both a DAC (digital to analog converter) and headphone amplifier
• Line-level RCA and headphone amplified 3.5mm jack outputs
• Plug and play compatibility for ease of use
• Hardware and software volume control from your Raspberry Pi
• No soldering required
• Powered by the Raspberry Pi GPIO header
• Compatible with Raspberry Pi A+,B+, 2B and the new 3B (and also compatible with the Raspberry Pi Zero, but we would recommend the JustBoom DAC Zero for this purpose)
• Mounting hardware included
• Optional IR receiver included in package
• Compatible with the JustBoom Amp which can easily stack on top of the DAC HAT to add amplification and extra outputs!
• All Raspberry Pi GPIO pins still accessible via 40pin unpopulated extension header
• Our Raspberry Pi DAC is fully HAT compliant
• Full driver support in Raspbian
• Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Product review & video
hey guys it's Chris here from paisa play today's unboxing video we're going to take a look at the duck heart we're also going to show you how to connect it to the rasli pi/2 so the duck hat is a high definition audio board for the Raspberry Pi so allows you to play digital audio from the Razzie PI and convert it into analog through a headphone jacks on RCA line level so let's take a look at the die-cuts and see what we got inside so first up we got a really cool just boom sticker there will Scott another just boom sticker we've got a nice card from max2play some information there so the dark art is compatible with much do you play operating system as if you want to find out for more information now you can go to the web link at the bottom there we've also got an information card or just boom information such as a link to show you how to get started with the dark arts we've also got a ru


Similar products
