Inovonics Wireless - EN4204R - 4point/5relay Output Receiver

this is Chris with in Ebonics today we're going to be talking about the six steps to programming the en four to zero for our receiver as you can see we've got our receiver here we do already have power applied to it the receiver needs 12 volts DC and at least 500 milliamps from its power supply and next I'm going to show you how to open it on the top we've got a single pry point and at the bottom we've got two pry points so the easiest way is to get your priming at the top stick your screwdriver in there and pry it up and we always want to make sure that we're prying and not twisting otherwise it can damage the plastic and the other thing that I want to point out is on the inside of the cover we've got a wiring diagram on a label so you may want to reference that later on as you decide where you're going to put your wires especially for that fault output we'll put that aside for now and