Description

The Skylink FS-433W Flood Sensor detects leaks near its sensors. Don’t let a water leak cause expensive damage to your home and try a ‘set it and forget it’ flood sensor. Set this water leak sensor along the basement wall, near the water heater, washing machine, toilet, bathtub or any other place to detect water damages. When the sensor detects water, it will send a wireless signal to your control panel or emergency dialer and alert you. Included: 12V long-life lithium battery. Note: This sensor requires a Skylink SC Security System to work such as SC-10W, SC-100W and SC-1000W systems.

Since 1990, Skylink Technologies has strived to manufacture automated systems that ease your home control. Today, Skylink manufactures and distributes a DIY wireless alarm system with app control capabilities, DIY home automation and garage door openers to assemble your connected home.

If you have any questions, call us anytime toll free 1-800-304-1187 or send us an email at support@skylinkhome.com.

Skylink FS-433W Wireless Flood Water Leak Alert Alarm Safety Protection Security Sensor | Affordable, Easy to install DIY Accessory for SC Series Systems

Get price

Current Price

$21.24

Average

$20.8

Min Price

$5.68

Max Price

$24.59

Price dynamics

Description

According to the data, price will be lower in next two weeks, so not waste your money and track better price!

Product review & video

welcome to the installation walkthrough video for the flood master RS o 94 your essential components are the actuator the shutoff valve the sensor the power supply the installation instructions and Quick Start Guide and the coffee wait a minute coffee is optional the first step manually shut off the water feed line then install the flood master shutoff valve on the feed line in any orientation following all local plumbing codes sharp fights or similar push fittings work great for this application next line up the mounting pins on the actuator to the mounting holes on the valve and mount the snap fit actuator to the valve the actuator can be mounted in any direction or orientation next plug the pre-wired terminal block into the actuator and plug in the power supply to a wall outlet the green power indicator light on the actuator should turn on next apply a wet paper towel to the sensor p