Description
Features:
1.Can maximum learning 32 infrared, vibration, magnetics etc wireless sensor accessories and 8 remote controllers.
2.Remote transmission range up to 280M/918ft in the open space.
3.Install the transmitter in the ceiling or aisle of the entrance where customers and intruder go back and forth, installation by screws will be more firm than double-sided tap which required tidy and smooth surface.
Batteries and Power
1.3*AAA alkaline batteries for PIR transmitter, 3*AA for Receiver, please note the negative and positive.
2.Alkaline batteries are recommonded, other types will shorten standby time and lower the alarm volume, Micro USB is alternative for power supply;battery supply will be automatically cut off if AC power, and can be standby power supply if power off.
3.You will hear short ""DU"" and see LED colorful lights flashing after loading the batteries for receiver, load the batteries, turn on the transmitter, the blue LED indicator will be on for 5 seconds.
Low Batteries Indication
1.Infrared curtain LED flashes once every 3 seconds
2.Receiver:if you hear the low battery indication sounds when it is in application, please replace the battery in time, or all functions cannot be realized.
3.LED indicator gets darker or wireless range get shorter
Parameters
1.Battery Lifespan:5-7 months (based on 30 times per day)
2.Working Frequency:433.92MHz
3.Working Temperature:10 degree below zero to 60 degree above zero
4.Operating Humidity:below 80 percent
5.Storage Temperature:20 degree below zero to 70 degree above zero
6.Remote Controller: 1x12V 27A(not included)
7.Rmote Controller: Approx. 60x40x20mm/ 2.36x1.57x0.79inch
8.Remote Left Button: Turn ON/ Switch Mode
Note
This sensor must match with our 20R receiver alarm, not be used individually
1.Can maximum learning 32 infrared, vibration, magnetics etc wireless sensor accessories and 8 remote controllers.
2.Remote transmission range up to 280M/918ft in the open space.
3.Install the transmitter in the ceiling or aisle of the entrance where customers and intruder go back and forth, installation by screws will be more firm than double-sided tap which required tidy and smooth surface.
Batteries and Power
1.3*AAA alkaline batteries for PIR transmitter, 3*AA for Receiver, please note the negative and positive.
2.Alkaline batteries are recommonded, other types will shorten standby time and lower the alarm volume, Micro USB is alternative for power supply;battery supply will be automatically cut off if AC power, and can be standby power supply if power off.
3.You will hear short ""DU"" and see LED colorful lights flashing after loading the batteries for receiver, load the batteries, turn on the transmitter, the blue LED indicator will be on for 5 seconds.
Low Batteries Indication
1.Infrared curtain LED flashes once every 3 seconds
2.Receiver:if you hear the low battery indication sounds when it is in application, please replace the battery in time, or all functions cannot be realized.
3.LED indicator gets darker or wireless range get shorter
Parameters
1.Battery Lifespan:5-7 months (based on 30 times per day)
2.Working Frequency:433.92MHz
3.Working Temperature:10 degree below zero to 60 degree above zero
4.Operating Humidity:below 80 percent
5.Storage Temperature:20 degree below zero to 70 degree above zero
6.Remote Controller: 1x12V 27A(not included)
7.Rmote Controller: Approx. 60x40x20mm/ 2.36x1.57x0.79inch
8.Remote Left Button: Turn ON/ Switch Mode
Note
This sensor must match with our 20R receiver alarm, not be used individually
SuperInk 1PK Muti-Function Wireless Welcome Warning Greeting Doorbell PIR Motion Detector Sensor Visitor Chime Door Bell Infrared Security Smart Entry Alert System
Price is below average
Current Price
$8.85
Average
$9.22
Min Price
$8.85
Max Price
$9.95
Price dynamics
4%
Description
Features:
1.Can maximum learning 32 infrared, vibration, magnetics etc wireless sensor accessories and 8 remote controllers.
2.Remote transmission range up to 280M/918ft in the open space.
3.Install the transmitter in the ceiling or aisle of the entrance where customers and intruder go back and forth, installation by screws will be more firm than double-sided tap which required tidy and smooth surface.
Batteries and Power
1.3*AAA alkaline batteries for PIR transmitter, 3*AA for Receiver, please note the negative and positive.
2.Alkaline batteries are recommonded, other types will shorten standby time and lower the alarm volume, Micro USB is alternative for power supply;battery supply will be automatically cut off if AC power, and can be standby power supply if power off.
3.You will hear short ""DU"" and see LED colorful lights flashing after loading the batteries for receiver, load the batteries, turn on the transmitter, the blue LED indicator will be on for 5 seconds.
Low Batteries Indication
1.Infrared curtain LED flashes once every 3 seconds
2.Receiver:if you hear the low battery indication sounds when it is in application, please replace the battery in time, or all functions cannot be realized.
3.LED indicator gets darker or wireless range get shorter
Parameters
1.Battery Lifespan:5-7 months (based on 30 times per day)
2.Working Frequency:433.92MHz
3.Working Temperature:10 degree below zero to 60 degree above zero
4.Operating Humidity:below 80 percent
5.Storage Temperature:20 degree below zero to 70 degree above zero
6.Remote Controller: 1x12V 27A(not included)
7.Rmote Controller: Approx. 60x40x20mm/ 2.36x1.57x0.79inch
8.Remote Left Button: Turn ON/ Switch Mode
Note
This sensor must match with our 20R receiver alarm, not be used individually
1.Can maximum learning 32 infrared, vibration, magnetics etc wireless sensor accessories and 8 remote controllers.
2.Remote transmission range up to 280M/918ft in the open space.
3.Install the transmitter in the ceiling or aisle of the entrance where customers and intruder go back and forth, installation by screws will be more firm than double-sided tap which required tidy and smooth surface.
Batteries and Power
1.3*AAA alkaline batteries for PIR transmitter, 3*AA for Receiver, please note the negative and positive.
2.Alkaline batteries are recommonded, other types will shorten standby time and lower the alarm volume, Micro USB is alternative for power supply;battery supply will be automatically cut off if AC power, and can be standby power supply if power off.
3.You will hear short ""DU"" and see LED colorful lights flashing after loading the batteries for receiver, load the batteries, turn on the transmitter, the blue LED indicator will be on for 5 seconds.
Low Batteries Indication
1.Infrared curtain LED flashes once every 3 seconds
2.Receiver:if you hear the low battery indication sounds when it is in application, please replace the battery in time, or all functions cannot be realized.
3.LED indicator gets darker or wireless range get shorter
Parameters
1.Battery Lifespan:5-7 months (based on 30 times per day)
2.Working Frequency:433.92MHz
3.Working Temperature:10 degree below zero to 60 degree above zero
4.Operating Humidity:below 80 percent
5.Storage Temperature:20 degree below zero to 70 degree above zero
6.Remote Controller: 1x12V 27A(not included)
7.Rmote Controller: Approx. 60x40x20mm/ 2.36x1.57x0.79inch
8.Remote Left Button: Turn ON/ Switch Mode
Note
This sensor must match with our 20R receiver alarm, not be used individually
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
