Description
Works on MacOS X (Snow Leopard 10.6.3) with virtual machine emulating Windows XP SP3 USB (V2.x) from PC/Laptop running Windows XP, Vista or Windows 7, Windows 8(32 bit or 64bit) Motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper, PICStep) Controller works with most step/dir stepper and servo motor drivers available on the market Buffered IO for maximum performance Advanced interpolation algorithms Start, stop, pause and resume execution of program on your machine Standard RS274/NGC G-code (EMC2 compatible) Advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported Advanced G-codes - G43, G49 (Tool Length Offsets) supported Advanced G-codes - G54, G59.3 (Coordinate System Origins) supported Tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code Profili 4-axes and 3-axes G-code supported Import toolpath from DXF file Import toolpath from PLT/HPGL files Import toolpath from image files Import toolpath from NC-Drill (Excellon) files Import toolpath from Gerber (RS-274X) files Toolpath simulation Automatic homing procedure Advanced toolchange procedures Automatic tool length measuring Export toolpath to G-code Export toolpath to DXF SDK (software developers kit) is available 25 kHz maximum step frequency 3 digital outputs (flood, mist, spindle) 12 us minimum pulse width Manual jog inputs for all axes Limit inputs for all axes Control external devices with I2C protocol
USBCNC 2.1 4 Axis USB CNC Controller Interface Board CNCUSB
Current Price
$29.99
Average
$29.99
Min Price
$29.99
Max Price
$29.99
Price dynamics
0%
Description
Works on MacOS X (Snow Leopard 10.6.3) with virtual machine emulating Windows XP SP3 USB (V2.x) from PC/Laptop running Windows XP, Vista or Windows 7, Windows 8(32 bit or 64bit) Motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper, PICStep) Controller works with most step/dir stepper and servo motor drivers available on the market Buffered IO for maximum performance Advanced interpolation algorithms Start, stop, pause and resume execution of program on your machine Standard RS274/NGC G-code (EMC2 compatible) Advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported Advanced G-codes - G43, G49 (Tool Length Offsets) supported Advanced G-codes - G54, G59.3 (Coordinate System Origins) supported Tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code Profili 4-axes and 3-axes G-code supported Import toolpath from DXF file Import toolpath from PLT/HPGL files Import toolpath from image files Import toolpath from NC-Drill (Excellon) files Import toolpath from Gerber (RS-274X) files Toolpath simulation Automatic homing procedure Advanced toolchange procedures Automatic tool length measuring Export toolpath to G-code Export toolpath to DXF SDK (software developers kit) is available 25 kHz maximum step frequency 3 digital outputs (flood, mist, spindle) 12 us minimum pulse width Manual jog inputs for all axes Limit inputs for all axes Control external devices with I2C protocol
Price will be lower
in next 2 weeks
in next 2 weeks
According to the data, price will be lower in next two weeks, so not waste your money and track better price!
Similar products
